gitee.com/ks-custle/core-gm@v0.0.0-20230922171213-b83bdd97b62c/net/http2/errors.go (about)

     1  // Copyright 2014 The Go Authors. All rights reserved.
     2  // Use of this source code is governed by a BSD-style
     3  // license that can be found in the LICENSE file.
     4  
     5  package http2
     6  
     7  import (
     8  	"errors"
     9  	"fmt"
    10  )
    11  
    12  // An ErrCode is an unsigned 32-bit error code as defined in the HTTP/2 spec.
    13  type ErrCode uint32
    14  
    15  const (
    16  	ErrCodeNo                 ErrCode = 0x0
    17  	ErrCodeProtocol           ErrCode = 0x1
    18  	ErrCodeInternal           ErrCode = 0x2
    19  	ErrCodeFlowControl        ErrCode = 0x3
    20  	ErrCodeSettingsTimeout    ErrCode = 0x4
    21  	ErrCodeStreamClosed       ErrCode = 0x5
    22  	ErrCodeFrameSize          ErrCode = 0x6
    23  	ErrCodeRefusedStream      ErrCode = 0x7
    24  	ErrCodeCancel             ErrCode = 0x8
    25  	ErrCodeCompression        ErrCode = 0x9
    26  	ErrCodeConnect            ErrCode = 0xa
    27  	ErrCodeEnhanceYourCalm    ErrCode = 0xb
    28  	ErrCodeInadequateSecurity ErrCode = 0xc
    29  	ErrCodeHTTP11Required     ErrCode = 0xd
    30  )
    31  
    32  var errCodeName = map[ErrCode]string{
    33  	ErrCodeNo:                 "NO_ERROR",
    34  	ErrCodeProtocol:           "PROTOCOL_ERROR",
    35  	ErrCodeInternal:           "INTERNAL_ERROR",
    36  	ErrCodeFlowControl:        "FLOW_CONTROL_ERROR",
    37  	ErrCodeSettingsTimeout:    "SETTINGS_TIMEOUT",
    38  	ErrCodeStreamClosed:       "STREAM_CLOSED",
    39  	ErrCodeFrameSize:          "FRAME_SIZE_ERROR",
    40  	ErrCodeRefusedStream:      "REFUSED_STREAM",
    41  	ErrCodeCancel:             "CANCEL",
    42  	ErrCodeCompression:        "COMPRESSION_ERROR",
    43  	ErrCodeConnect:            "CONNECT_ERROR",
    44  	ErrCodeEnhanceYourCalm:    "ENHANCE_YOUR_CALM",
    45  	ErrCodeInadequateSecurity: "INADEQUATE_SECURITY",
    46  	ErrCodeHTTP11Required:     "HTTP_1_1_REQUIRED",
    47  }
    48  
    49  func (e ErrCode) String() string {
    50  	if s, ok := errCodeName[e]; ok {
    51  		return s
    52  	}
    53  	return fmt.Sprintf("unknown error code 0x%x", uint32(e))
    54  }
    55  
    56  func (e ErrCode) stringToken() string {
    57  	if s, ok := errCodeName[e]; ok {
    58  		return s
    59  	}
    60  	return fmt.Sprintf("ERR_UNKNOWN_%d", uint32(e))
    61  }
    62  
    63  // ConnectionError is an error that results in the termination of the
    64  // entire connection.
    65  type ConnectionError ErrCode
    66  
    67  func (e ConnectionError) Error() string { return fmt.Sprintf("connection error: %s", ErrCode(e)) }
    68  
    69  // StreamError is an error that only affects one stream within an
    70  // HTTP/2 connection.
    71  type StreamError struct {
    72  	StreamID uint32
    73  	Code     ErrCode
    74  	Cause    error // optional additional detail
    75  }
    76  
    77  // errFromPeer is a sentinel error value for StreamError.Cause to
    78  // indicate that the StreamError was sent from the peer over the wire
    79  // and wasn't locally generated in the Transport.
    80  var errFromPeer = errors.New("received from peer")
    81  
    82  func streamError(id uint32, code ErrCode) StreamError {
    83  	return StreamError{StreamID: id, Code: code}
    84  }
    85  
    86  func (e StreamError) Error() string {
    87  	if e.Cause != nil {
    88  		return fmt.Sprintf("stream error: stream ID %d; %v; %v", e.StreamID, e.Code, e.Cause)
    89  	}
    90  	return fmt.Sprintf("stream error: stream ID %d; %v", e.StreamID, e.Code)
    91  }
    92  
    93  // 6.9.1 The Flow Control Window
    94  // "If a sender receives a WINDOW_UPDATE that causes a flow control
    95  // window to exceed this maximum it MUST terminate either the stream
    96  // or the connection, as appropriate. For streams, [...]; for the
    97  // connection, a GOAWAY frame with a FLOW_CONTROL_ERROR code."
    98  type goAwayFlowError struct{}
    99  
   100  func (goAwayFlowError) Error() string { return "connection exceeded flow control window size" }
   101  
   102  // connError represents an HTTP/2 ConnectionError error code, along
   103  // with a string (for debugging) explaining why.
   104  //
   105  // Errors of this type are only returned by the frame parser functions
   106  // and converted into ConnectionError(Code), after stashing away
   107  // the Reason into the Framer's errDetail field, accessible via
   108  // the (*Framer).ErrorDetail method.
   109  type connError struct {
   110  	Code   ErrCode // the ConnectionError error code
   111  	Reason string  // additional reason
   112  }
   113  
   114  func (e connError) Error() string {
   115  	return fmt.Sprintf("http2: connection error: %v: %v", e.Code, e.Reason)
   116  }
   117  
   118  type pseudoHeaderError string
   119  
   120  func (e pseudoHeaderError) Error() string {
   121  	return fmt.Sprintf("invalid pseudo-header %q", string(e))
   122  }
   123  
   124  type duplicatePseudoHeaderError string
   125  
   126  func (e duplicatePseudoHeaderError) Error() string {
   127  	return fmt.Sprintf("duplicate pseudo-header %q", string(e))
   128  }
   129  
   130  type headerFieldNameError string
   131  
   132  func (e headerFieldNameError) Error() string {
   133  	return fmt.Sprintf("invalid header field name %q", string(e))
   134  }
   135  
   136  type headerFieldValueError string
   137  
   138  func (e headerFieldValueError) Error() string {
   139  	return fmt.Sprintf("invalid header field value %q", string(e))
   140  }
   141  
   142  var (
   143  	errMixPseudoHeaderTypes = errors.New("mix of request and response pseudo headers")
   144  	errPseudoAfterRegular   = errors.New("pseudo header field after regular")
   145  )