github.com/MaynardMiner/ethereumprogpow@v1.8.23/swarm/pss/README.md (about)

     1  # Postal Services over Swarm
     2  
     3  `pss` enables message relay over swarm. This means nodes can send messages to each other without being directly connected with each other, while taking advantage of the efficient routing algorithms that swarm uses for transporting and storing data.
     4  
     5  ### CONTENTS
     6  
     7  * Status of this document
     8  * Core concepts
     9  * Caveat
    10  * Examples
    11  * API
    12    * Retrieve node information
    13    * Receive messages
    14    * Send messages using public key encryption
    15    * Send messages using symmetric encryption
    16    * Querying peer keys
    17    * Handshakes
    18  
    19  ### STATUS OF THIS DOCUMENT
    20  
    21  `pss` is under active development, and the first implementation is yet to be merged to the Ethereum main branch. Expect things to change.
    22  
    23  Details on swarm routing and encryption schemes out of scope of this document.
    24  
    25  Please refer to [ARCHITECTURE.md](ARCHITECTURE.md) for in-depth topics concerning `pss`.
    26  
    27  ## CORE CONCEPTS
    28  
    29  Three things are required to send a `pss` message:
    30  
    31  1. Encryption key
    32  2. Topic
    33  3. Message payload
    34  
    35  Encryption key can be a public key or a 32 byte symmetric key. It must be coupled with a peer address in the node prior to sending.
    36  
    37  Topic is the initial 4 bytes of a hash value.
    38  
    39  Message payload is an arbitrary byte slice of data.
    40  
    41  Upon sending the message it is encrypted and passed on from peer to peer. Any node along the route that can successfully decrypt the message is regarded as a recipient. Recipients continue to pass on the message to their peers, to make traffic analysis attacks more difficult.
    42  
    43  The Address that is coupled with the encryption keys are used for routing the message. This does *not* need to be a full addresses; the network will route the message to the best of its ability with the information that is available. If *no* address is given (zero-length byte slice), routing is effectively deactivated, and the message is passed to all peers by all peers.
    44  
    45  ## CAVEAT
    46  
    47  `pss` connectivity resembles UDP. This means there is no delivery guarantee for a message. Furthermore there is no strict definition of what a connection between two nodes communicating via `pss` is. Reception acknowledgements and keepalive-schemes is the responsibility of the application.
    48  
    49  Due to the inherent properties of the `swarm` routing algorithm, a node may receive the same message more than once. Message deduplication *cannot be guaranteed* by `pss`, and must be handled in the application layer to ensure predictable results.
    50  
    51  ## EXAMPLES
    52  
    53  The code tutorial [p2p programming in go-ethereum](https://github.com/nolash/go-ethereum-p2p-demo) by [@nolash](https://github.com/nolash) provides step-by-step code examples for usage of `pss` API with `go-ethereum` nodes.
    54  
    55  A quite unpolished example using `javascript` is available here: [https://github.com/nolash/pss-js/tree/withcrypt](https://github.com/nolash/pss-js/tree/withcrypt)
    56  
    57  ## API
    58  
    59  The `pss` API is available through IPC and Websockets. There is currently no `web3.js` implementation, as this does not support message subscription.
    60  
    61  For `golang` clients, please use the `rpc.Client` provided by the `go-ethereum` repository. The return values may have special types in `golang`. Please refer to `godoc` for details.
    62  
    63  ### RETRIEVE NODE INFORMATION
    64  
    65  #### pss_getPublicKey
    66  
    67  Retrieves the public key of the node, in hex format
    68  
    69  ```
    70  parameters:
    71  none
    72  
    73  returns:
    74  1. publickey (hex)
    75  ```
    76  
    77  #### pss_baseAddr
    78  
    79  Retrieves the swarm overlay address of the node, in hex format
    80  
    81  ```
    82  parameters:
    83  none
    84  
    85  returns:
    86  1. swarm overlay address (hex)
    87  ```
    88  
    89  #### pss_stringToTopic
    90  
    91  Creates a deterministic 4 byte topic value from input, returned in hex format
    92  
    93  ```
    94  parameters:
    95  1. topic string (string)
    96  
    97  returns:
    98  1. pss topic (hex)
    99  ```
   100  
   101  ### RECEIVE MESSAGES
   102  
   103  #### pss_subscribe
   104  
   105  Creates a subscription. Received messages with matching topic will be passed to subscription client.
   106  
   107  ```
   108  parameters:
   109  1. string("receive")
   110  2. topic (4 bytes in hex)
   111  
   112  returns:
   113  1. subscription handle `base64(byte)` `rpc.ClientSubscription`
   114  ```
   115  
   116  In `golang` as special method is used:
   117  
   118  `rpc.Client.Subscribe(context.Context, "pss", chan pss.APIMsg, "receive", pss.Topic)`
   119  
   120  Incoming messages are encapsulated in an object (`pss.APIMsg` in `golang`) with the following members:
   121  
   122  ```
   123  1. Msg (hex) - the message payload
   124  2. Asymmetric (bool) - true if message used public key encryption
   125  3. Key (string) - the encryption key used
   126  ```
   127  
   128  ### SEND MESSAGE USING PUBLIC KEY ENCRYPTION
   129  
   130  #### pss_setPeerPublicKey
   131  
   132  Register a peer's public key. This is done once for every topic that will be used with the peer. Address can be anything from 0 to 32 bytes inclusive of the peer's swarm overlay address.
   133  
   134  ```
   135  parameters:
   136  1. public key of peer (hex)
   137  2. topic (4 bytes in hex)
   138  3. address of peer (hex)
   139  
   140  returns:
   141  none
   142  ```
   143  
   144  #### pss_sendAsym
   145  
   146  Encrypts the message using the provided public key, and signs it using the node's private key. It then wraps it in an envelope containing the topic, and sends it to the network. 
   147  
   148  ```
   149  parameters:
   150  1. public key of peer (hex)
   151  2. topic (4 bytes in hex)
   152  3. message (hex)
   153  
   154  returns:
   155  none
   156  ```
   157  
   158  ### SEND MESSAGE USING SYMMETRIC ENCRYPTION
   159  
   160  #### pss_setSymmetricKey
   161  
   162  Register a symmetric key shared with a peer. This is done once for every topic that will be used with the peer. Address can be anything from 0 to 32 bytes inclusive of the peer's swarm overlay address.
   163  
   164  If the fourth parameter is false, the key will *not* be added to the list of symmetric keys used for decryption attempts.
   165  
   166  ```
   167  parameters:
   168  1. symmetric key (hex)
   169  2. topic (4 bytes in hex)
   170  3. address of peer (hex)
   171  4. use for decryption (bool)
   172  
   173  returns:
   174  1. symmetric key id (string)
   175  ```
   176  
   177  #### pss_sendSym
   178  
   179  Encrypts the message using the provided symmetric key, wraps it in an envelope containing the topic, and sends it to the network.
   180  
   181  ```
   182  parameters:
   183  1. symmetric key id (string)
   184  2. topic (4 bytes in hex)
   185  3. message (hex)
   186  
   187  returns:
   188  none
   189  ```
   190  
   191  ### QUERY PEER KEYS
   192  
   193  #### pss_GetSymmetricAddressHint
   194  
   195  Return the swarm overlay address associated with the peer registered with the given symmetric key and topic combination.
   196  
   197  ```
   198  parameters:
   199  1. topic (4 bytes in hex)
   200  2. symmetric key id (string)
   201  
   202  returns:
   203  1. peer address (hex)
   204  ```
   205  
   206  #### pss_GetAsymmetricAddressHint
   207  
   208  Return the swarm overlay address associated with the peer registered with the given symmetric key and topic combination.
   209  
   210  ```
   211  parameters:
   212  1. topic (4 bytes in hex)
   213  2. public key in hex form (string)
   214  
   215  returns:
   216  1. peer address (hex)
   217  ```
   218  
   219  ### HANDSHAKES
   220  
   221  Convenience implementation of Diffie-Hellman handshakes using ephemeral symmetric keys. Peers keep separate sets of keys for incoming and outgoing communications.
   222  
   223  *This functionality is an optional feature in `pss`. It is compiled in by default, but can be omitted by providing the `nopsshandshake` build tag.*
   224  
   225  #### pss_addHandshake
   226  
   227  Activate handshake functionality on the specified topic.
   228  
   229  ```
   230  parameters:
   231  1. topic (4 bytes in hex)
   232  
   233  returns:
   234  none
   235  ```
   236  
   237  #### pss_removeHandshake
   238  
   239  Remove handshake functionality on the specified topic.
   240  
   241  ```
   242  parameters:
   243  1. topic (4 bytes in hex)
   244  
   245  returns:
   246  none
   247  ```
   248  
   249  #### pss_handshake
   250  
   251  Instantiate handshake with peer, refreshing symmetric encryption keys.
   252  
   253  If parameter 3 is false, the returned array will be empty.
   254  
   255  ```
   256  parameters:
   257  1. public key of peer in hex format (string)
   258  2. topic (4 bytes in hex)
   259  3. block calls until keys are received (bool)
   260  4. flush existing incoming keys (bool)
   261  
   262  returns:
   263  1. list of symmetric keys (string[])
   264  ```
   265  
   266  #### pss_getHandshakeKeys
   267  
   268  Get valid symmetric encryption keys for a specified peer and topic.
   269  
   270  parameters:
   271  1. public key of peer in hex format (string)
   272  2. topic (4 bytes in hex)
   273  3. include keys for incoming messages (bool)
   274  4. include keys for outgoing messages (bool)
   275  
   276  returns:
   277  1. list of symmetric keys (string[])
   278  
   279  #### pss_getHandshakeKeyCapacity
   280  
   281  Get amount of remaining messages the specified key is valid for.
   282  
   283  ```
   284  parameters:
   285  1. symmetric key id (string)
   286  
   287  returns:
   288  1. number of messages (uint16)
   289  ```
   290  
   291  #### pss_getHandshakePublicKey
   292  
   293  Get the peer's public key associated with the specified symmetric key.
   294  
   295  ```
   296  parameters:
   297  1. symmetric key id (string)
   298  
   299  returns:
   300  1. Associated public key in hex format (string)
   301  ```
   302  
   303  #### pss_releaseHandshakeKey
   304  
   305  Invalidate the specified key.
   306  
   307  Normally, the key will be kept for a grace period to allow for decryption of delayed messages. If instant removal is set, this grace period is omitted, and the key removed instantaneously.
   308  
   309  ```
   310  parameters:
   311  1. public key of peer in hex format (string)
   312  2. topic (4 bytes in hex)
   313  3. symmetric key id to release (string)
   314  4. remove keys instantly (bool)
   315  
   316  returns:
   317  1. whether key was successfully removed (bool)
   318  ```