github.com/aergoio/aergo@v1.3.1/libtool/src/gmp-6.1.2/mpn/sparc64/README (about) 1 Copyright 1997, 1999-2002 Free Software Foundation, Inc. 2 3 This file is part of the GNU MP Library. 4 5 The GNU MP Library is free software; you can redistribute it and/or modify 6 it under the terms of either: 7 8 * the GNU Lesser General Public License as published by the Free 9 Software Foundation; either version 3 of the License, or (at your 10 option) any later version. 11 12 or 13 14 * the GNU General Public License as published by the Free Software 15 Foundation; either version 2 of the License, or (at your option) any 16 later version. 17 18 or both in parallel, as here. 19 20 The GNU MP Library is distributed in the hope that it will be useful, but 21 WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY 22 or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License 23 for more details. 24 25 You should have received copies of the GNU General Public License and the 26 GNU Lesser General Public License along with the GNU MP Library. If not, 27 see https://www.gnu.org/licenses/. 28 29 30 31 32 33 This directory contains mpn functions for 64-bit V9 SPARC 34 35 RELEVANT OPTIMIZATION ISSUES 36 37 Notation: 38 IANY = shift/add/sub/logical/sethi 39 IADDLOG = add/sub/logical/sethi 40 MEM = ld*/st* 41 FA = fadd*/fsub*/f*to*/fmov* 42 FM = fmul* 43 44 UltraSPARC can issue four instructions per cycle, with these restrictions: 45 * Two IANY instructions, but only one of these may be a shift. If there is a 46 shift and an IANY instruction, the shift must precede the IANY instruction. 47 * One FA. 48 * One FM. 49 * One branch. 50 * One MEM. 51 * IANY/IADDLOG/MEM must be insn 1, 2, or 3 in an issue bundle. Taken branches 52 should not be in slot 4, since that makes the delay insn come from separate 53 bundle. 54 * If two IANY/IADDLOG instructions are to be executed in the same cycle and one 55 of these is setting the condition codes, that instruction must be the second 56 one. 57 58 To summarize, ignoring branches, these are the bundles that can reach the peak 59 execution speed: 60 61 insn1 iany iany mem iany iany mem iany iany mem 62 insn2 iaddlog mem iany mem iaddlog iany mem iaddlog iany 63 insn3 mem iaddlog iaddlog fa fa fa fm fm fm 64 insn4 fa/fm fa/fm fa/fm fm fm fm fa fa fa 65 66 The 64-bit integer multiply instruction mulx takes from 5 cycles to 35 cycles, 67 depending on the position of the most significant bit of the first source 68 operand. When used for 32x32->64 multiplication, it needs 20 cycles. 69 Furthermore, it stalls the processor while executing. We stay away from that 70 instruction, and instead use floating-point operations. 71 72 Floating-point add and multiply units are fully pipelined. The latency for 73 UltraSPARC-1/2 is 3 cycles and for UltraSPARC-3 it is 4 cycles. 74 75 Integer conditional move instructions cannot dual-issue with other integer 76 instructions. No conditional move can issue 1-5 cycles after a load. (This 77 might have been fixed for UltraSPARC-3.) 78 79 The UltraSPARC-3 pipeline is very simular to the one of UltraSPARC-1/2 , but is 80 somewhat slower. Branches execute slower, and there may be other new stalls. 81 But integer multiply doesn't stall the entire CPU and also has a much lower 82 latency. But it's still not pipelined, and thus useless for our needs. 83 84 STATUS 85 86 * mpn_lshift, mpn_rshift: The current code runs at 2.0 cycles/limb on 87 UltraSPARC-1/2 and 2.65 on UltraSPARC-3. For UltraSPARC-1/2, the IEU0 88 functional unit is saturated with shifts. 89 90 * mpn_add_n, mpn_sub_n: The current code runs at 4 cycles/limb on 91 UltraSPARC-1/2 and 4.5 cycles/limb on UltraSPARC-3. The 4 instruction 92 recurrency is the speed limiter. 93 94 * mpn_addmul_1: The current code runs at 14 cycles/limb asymptotically on 95 UltraSPARC-1/2 and 17.5 cycles/limb on UltraSPARC-3. On UltraSPARC-1/2, the 96 code sustains 4 instructions/cycle. It might be possible to invent a better 97 way of summing the intermediate 49-bit operands, but it is unlikely that it 98 will save enough instructions to save an entire cycle. 99 100 The load-use of the u operand is not enough scheduled for good L2 cache 101 performance. The UltraSPARC-1/2 L1 cache is direct mapped, and since we use 102 temporary stack slots that will conflict with the u and r operands, we miss 103 to L2 very often. The load-use of the std/ldx pairs via the stack are 104 perhaps over-scheduled. 105 106 It would be possible to save two instructions: (1) The mov could be avoided 107 if the std/ldx were less scheduled. (2) The ldx of the r operand could be 108 split into two ld instructions, saving the shifts/masks. 109 110 It should be possible to reach 14 cycles/limb for UltraSPARC-3 if the fp 111 operations where rescheduled for this processor's 4-cycle latency. 112 113 * mpn_mul_1: The current code is a straightforward edit of the mpn_addmul_1 114 code. It would be possible to shave one or two cycles from it, with some 115 labour. 116 117 * mpn_submul_1: Simpleminded code just calling mpn_mul_1 + mpn_sub_n. This 118 means that it runs at 18 cycles/limb on UltraSPARC-1/2 and 23 cycles/limb on 119 UltraSPARC-3. It would be possible to either match the mpn_addmul_1 120 performance, or in the worst case use one more instruction group. 121 122 * US1/US2 cache conflict resolving. The direct mapped L1 date cache of US1/US2 123 is a problem for mul_1, addmul_1 (and a prospective submul_1). We should 124 allocate a larger cache area, and put the stack temp area in a place that 125 doesn't cause cache conflicts.