github.com/cockroachdb/pebble@v0.0.0-20231214172447-ab4952c5f87b/objstorage/objstorageprovider/readahead.go

// Copyright 2023 The LevelDB-Go and Pebble Authors. All rights reserved. Use
// of this source code is governed by a BSD-style license that can be found in
// the LICENSE file.

package objstorageprovider

const (
	// Constants for dynamic readahead of data blocks. Note that the size values
	// make sense as some multiple of the default block size; and they should
	// both be larger than the default block size.
	minFileReadsForReadahead = 2
	// TODO(bilal): Have the initial size value be a factor of the block size,
	// as opposed to a hardcoded value.
	initialReadaheadSize = 64 << 10 /* 64KB */
)

// readaheadState contains state variables related to readahead. Updated on
// file reads.
type readaheadState struct {
	// Number of sequential reads.
	numReads         int64
	maxReadaheadSize int64
	// Size issued to the next call to Prefetch. Starts at or above
	// initialReadaheadSize and grows exponentially until maxReadaheadSize.
	size int64
	// prevSize is the size used in the last Prefetch call.
	prevSize int64
	// The byte offset up to which the OS has been asked to read ahead / cached.
	// When reading ahead, reads up to this limit should not incur an IO
	// operation. Reads after this limit can benefit from a new call to
	// Prefetch.
	limit int64
}

func makeReadaheadState(maxReadaheadSize int64) readaheadState {
	return readaheadState{
		size:             initialReadaheadSize,
		maxReadaheadSize: maxReadaheadSize,
	}
}

func (rs *readaheadState) recordCacheHit(offset, blockLength int64) {
	currentReadEnd := offset + blockLength
	if rs.numReads >= minFileReadsForReadahead {
		if currentReadEnd >= rs.limit && offset <= rs.limit+rs.maxReadaheadSize {
			// This is a read that would have resulted in a readahead, had it
			// not been a cache hit.
			rs.limit = currentReadEnd
			return
		}
		if currentReadEnd < rs.limit-rs.prevSize || offset > rs.limit+rs.maxReadaheadSize {
			// We read too far away from rs.limit to benefit from readahead in
			// any scenario. Reset all variables.
			rs.numReads = 1
			rs.limit = currentReadEnd
			rs.size = initialReadaheadSize
			rs.prevSize = 0
			return
		}
		// Reads in the range [rs.limit - rs.prevSize, rs.limit] end up
		// here. This is a read that is potentially benefitting from a past
		// readahead.
		return
	}
	if currentReadEnd >= rs.limit && offset <= rs.limit+rs.maxReadaheadSize {
		// Blocks are being read sequentially and would benefit from readahead
		// down the line.
		rs.numReads++
		return
	}
	// We read too far ahead of the last read, or before it. This indicates
	// a random read, where readahead is not desirable. Reset all variables.
	rs.numReads = 1
	rs.limit = currentReadEnd
	rs.size = initialReadaheadSize
	rs.prevSize = 0
}

// maybeReadahead updates state and determines whether to issue a readahead /
// prefetch call for a block read at offset for blockLength bytes.
// Returns a size value (greater than 0) that should be prefetched if readahead
// would be beneficial.
func (rs *readaheadState) maybeReadahead(offset, blockLength int64) int64 {
	currentReadEnd := offset + blockLength
	if rs.numReads >= minFileReadsForReadahead {
		// The minimum threshold of sequential reads to justify reading ahead
		// has been reached.
		// There are two intervals: the interval being read:
		// [offset, currentReadEnd]
		// as well as the interval where a read would benefit from read ahead:
		// [rs.limit, rs.limit + rs.size]
		// We increase the latter interval to
		// [rs.limit, rs.limit + rs.maxReadaheadSize] to account for cases where
		// readahead may not be beneficial with a small readahead size, but over
		// time the readahead size would increase exponentially to make it
		// beneficial.
		if currentReadEnd >= rs.limit && offset <= rs.limit+rs.maxReadaheadSize {
			// We are doing a read in the interval ahead of
			// the last readahead range. In the diagrams below, ++++ is the last
			// readahead range, ==== is the range represented by
			// [rs.limit, rs.limit + rs.maxReadaheadSize], and ---- is the range
			// being read.
			//
			//               rs.limit           rs.limit + rs.maxReadaheadSize
			//         ++++++++++|===========================|
			//
			//              |-------------|
			//            offset       currentReadEnd
			//
			// This case is also possible, as are all cases with an overlap
			// between [rs.limit, rs.limit + rs.maxReadaheadSize] and [offset,
			// currentReadEnd]:
			//
			//               rs.limit           rs.limit + rs.maxReadaheadSize
			//         ++++++++++|===========================|
			//
			//                                            |-------------|
			//                                         offset       currentReadEnd
			//
			//
			rs.numReads++
			rs.limit = offset + rs.size
			rs.prevSize = rs.size
			// Increase rs.size for the next read.
			rs.size *= 2
			if rs.size > rs.maxReadaheadSize {
				rs.size = rs.maxReadaheadSize
			}
			return rs.prevSize
		}
		if currentReadEnd < rs.limit-rs.prevSize || offset > rs.limit+rs.maxReadaheadSize {
			// The above conditional has rs.limit > rs.prevSize to confirm that
			// rs.limit - rs.prevSize would not underflow.
			// We read too far away from rs.limit to benefit from readahead in
			// any scenario. Reset all variables.
			// The case where we read too far ahead:
			//
			// (rs.limit - rs.prevSize)    (rs.limit)   (rs.limit + rs.maxReadaheadSize)
			//                    |+++++++++++++|=============|
			//
			//                                                  |-------------|
			//                                             offset       currentReadEnd
			//
			// Or too far behind:
			//
			// (rs.limit - rs.prevSize)    (rs.limit)   (rs.limit + rs.maxReadaheadSize)
			//                    |+++++++++++++|=============|
			//
			//    |-------------|
			// offset       currentReadEnd
			//
			rs.numReads = 1
			rs.limit = currentReadEnd
			rs.size = initialReadaheadSize
			rs.prevSize = 0

			return 0
		}
		// Reads in the range [rs.limit - rs.prevSize, rs.limit] end up
		// here. This is a read that is potentially benefitting from a past
		// readahead, but there's no reason to issue a readahead call at the
		// moment.
		//
		// (rs.limit - rs.prevSize)            (rs.limit + rs.maxReadaheadSize)
		//                    |+++++++++++++|===============|
		//                             (rs.limit)
		//
		//                        |-------|
		//                     offset    currentReadEnd
		//
		rs.numReads++
		return 0
	}
	if currentReadEnd >= rs.limit && offset <= rs.limit+rs.maxReadaheadSize {
		// Blocks are being read sequentially and would benefit from readahead
		// down the line.
		//
		//                       (rs.limit)   (rs.limit + rs.maxReadaheadSize)
		//                         |=============|
		//
		//                    |-------|
		//                offset    currentReadEnd
		//
		rs.numReads++
		return 0
	}
	// We read too far ahead of the last read, or before it. This indicates
	// a random read, where readahead is not desirable. Reset all variables.
	//
	// (rs.limit - rs.maxReadaheadSize)  (rs.limit)   (rs.limit + rs.maxReadaheadSize)
	//                     |+++++++++++++|=============|
	//
	//                                                    |-------|
	//                                                offset    currentReadEnd
	//
	rs.numReads = 1
	rs.limit = currentReadEnd
	rs.size = initialReadaheadSize
	rs.prevSize = 0
	return 0
}