github.com/cockroachdb/pebble@v1.1.2/testdata/compaction_setup_inputs_multilevel_write_amp (about)

     1  # Init a multi-level compaction, because multi level write amp is lower
     2  setup-inputs a a
     3  L1
     4    a.SET.1-b.SET.2 size=1
     5  L2
     6    a.SET.3-c.SET.4 size=1
     7  L3
     8    c.SET.3-d.SET.2 size=1
     9  ----
    10  L1
    11    000001:[a#1,1-b#2,1]
    12  L2
    13    000002:[a#3,1-c#4,1]
    14  L3
    15    000003:[c#3,1-d#2,1]
    16  init-multi-level(1,2,3)
    17  Original WriteAmp 2.00; ML WriteAmp 1.50
    18  Original OverlappingRatio 1.00; ML OverlappingRatio 0.50
    19  
    20  # Verify that the input level size should not affect the decision to conduct a multi
    21  # level compaction.
    22  setup-inputs a a
    23  L1
    24    a.SET.1-b.SET.2 size=10
    25  L2
    26    a.SET.3-c.SET.4 size=1
    27  L3
    28    c.SET.3-d.SET.2 size=1
    29  ----
    30  L1
    31    000001:[a#1,1-b#2,1]
    32  L2
    33    000002:[a#3,1-c#4,1]
    34  L3
    35    000003:[c#3,1-d#2,1]
    36  init-multi-level(1,2,3)
    37  Original WriteAmp 1.10; ML WriteAmp 1.09
    38  Original OverlappingRatio 0.10; ML OverlappingRatio 0.09
    39  
    40  # Don't init a multi-level compaction because write amp from multi level compaction is larger
    41  setup-inputs a a
    42  L1
    43    a.SET.1-b.SET.2 size=1
    44  L2
    45    a.SET.3-c.SET.4 size=1
    46  L3
    47    c.SET.3-d.SET.2 size=3
    48  ----
    49  L1
    50    000001:[a#1,1-b#2,1]
    51  L2
    52    000002:[a#3,1-c#4,1]
    53  
    54  # Init a multi-level compaction, but note that the second files in L2 and L3 do not get
    55  # chosen, as they don't overlap with the original compaction.
    56  setup-inputs a a
    57  L1
    58    a.SET.1-b.SET.2 size=6
    59  L2
    60    a.SET.3-c.SET.4 size=5
    61    e.SET.1-h.SET.4 size=4
    62  L3
    63    c.SET.3-d.SET.2 size=6
    64    e.SET.2-h.SET.4 size=4
    65  ----
    66  L1
    67    000001:[a#1,1-b#2,1]
    68  L2
    69    000002:[a#3,1-c#4,1]
    70  L3
    71    000004:[c#3,1-d#2,1]
    72  init-multi-level(1,2,3)
    73  Original WriteAmp 1.83; ML WriteAmp 1.55
    74  Original OverlappingRatio 0.83; ML OverlappingRatio 0.55
    75  
    76  # Init a multi-level compaction without an overlapping file in the lowest level.
    77  setup-inputs a a
    78  L1
    79    a.SET.1-b.SET.2 size=6
    80  L2 max-size=5
    81    a.SET.3-c.SET.4 size=5
    82  L3
    83    e.SET.3-f.SET.2 size=100
    84  ----
    85  L1
    86    000001:[a#1,1-b#2,1]
    87  L2
    88    000002:[a#3,1-c#4,1]
    89  init-multi-level(1,2,3)
    90  Original WriteAmp 1.83; ML WriteAmp 1.00
    91  Original OverlappingRatio 0.83; ML OverlappingRatio 0.00
    92  
    93  # Init a multi-level compaction with no file in the lowest level.
    94  setup-inputs a a
    95  L1
    96    a.SET.1-b.SET.2 size=6
    97  L2
    98    a.SET.3-c.SET.4 size=5
    99  ----
   100  L1
   101    000001:[a#1,1-b#2,1]
   102  L2
   103    000002:[a#3,1-c#4,1]
   104  init-multi-level(1,2,3)
   105  Original WriteAmp 1.83; ML WriteAmp 1.00
   106  Original OverlappingRatio 0.83; ML OverlappingRatio 0.00
   107  
   108  
   109  # Don't init a multi-level compaction, as the single level compaction results in a move (
   110  # write amp is 1) while the multi level compaction results in a Write Amp greater than 1
   111  setup-inputs a a
   112  L1
   113    a.SET.1-b.SET.2 size=6
   114  L2
   115    e.SET.3-f.SET.2 size=100
   116  L3
   117    a.SET.3-c.SET.4 size=5
   118  ----
   119  L1
   120    000001:[a#1,1-b#2,1]
   121  
   122  # Init a multi-level compaction, without an overlapping file in the (tie goes to the ML compaction!)
   123  # intermediate and output levels
   124  setup-inputs a a
   125  L1
   126    a.SET.1-b.SET.2 size=6
   127  L2
   128    e.SET.3-f.SET.2 size=1
   129  L3
   130    e.SET.4-f.SET.5 size=5
   131  ----
   132  L1
   133    000001:[a#1,1-b#2,1]
   134  init-multi-level(1,2,3)
   135  Original WriteAmp 1.00; ML WriteAmp 1.00
   136  Original OverlappingRatio 0.00; ML OverlappingRatio 0.00
   137  
   138  
   139  # Init a multi-level compaction which expands the intermediate level with a file that only
   140  # overlaps with the lowest level. (I.e. it gets included during second setupInputs call)
   141  setup-inputs a a
   142  L1
   143    a.SET.1-b.SET.2 size=3
   144  L2
   145    a.SET.2-b.SET.3 size=5
   146    c.SET.2-d.SET.3 size=3
   147  L3
   148    a.SET.3-c.SET.4 size=3
   149  ----
   150  L1
   151    000001:[a#1,1-b#2,1]
   152  L2
   153    000002:[a#2,1-b#3,1]
   154    000003:[c#2,1-d#3,1]
   155  L3
   156    000004:[a#3,1-c#4,1]
   157  init-multi-level(1,2,3)
   158  Original WriteAmp 2.67; ML WriteAmp 1.27
   159  Original OverlappingRatio 1.67; ML OverlappingRatio 0.27
   160  
   161  # Init a multi-level compaction which DOES NOT expand the input level with a file that
   162  # only overlaps with the lowest level, even if it doesn't expand the output level keyspan.
   163  # TODO(msbutler): include this file in the compaction
   164  setup-inputs a a
   165  L1
   166    a.SET.1-b.SET.2 size=1
   167    c.SET.2-d.SET.3 size=10
   168  L2
   169    a.SET.2-b.SET.3 size=1
   170  L3
   171    a.SET.3-c.SET.4 size=1
   172  ----
   173  L1
   174    000001:[a#1,1-b#2,1]
   175  L2
   176    000003:[a#2,1-b#3,1]
   177  L3
   178    000004:[a#3,1-c#4,1]
   179  init-multi-level(1,2,3)
   180  Original WriteAmp 2.00; ML WriteAmp 1.50
   181  Original OverlappingRatio 1.00; ML OverlappingRatio 0.50
   182  
   183  # Verify an expansion of the output level in the initial setupInputs will init a multi-level
   184  # compaction. i.e. without the initial expansion, the multil level compaction would not have
   185  # occurred.
   186  setup-inputs a a
   187  L1
   188    a.SET.5-b.SET.6 size=1
   189  L2
   190    a.SET.3-c.SET.4 size=1
   191    c.SET.3-d.SET.2 size=1
   192  L3
   193    c.SET.4-d.SET.4 size=3
   194  ----
   195  L1
   196    000001:[a#5,1-b#6,1]
   197  L2
   198    000002:[a#3,1-c#4,1]
   199    000003:[c#3,1-d#2,1]
   200  L3
   201    000004:[c#4,1-d#4,1]
   202  init-multi-level(1,2,3)
   203  Original WriteAmp 3.00; ML WriteAmp 2.00
   204  Original OverlappingRatio 2.00; ML OverlappingRatio 1.00
   205  
   206  setup-inputs a a
   207  L1
   208    a.SET.5-b.SET.6 size=1
   209  L2
   210    a.SET.3-c.SET.4 size=1
   211  L3
   212    c.SET.4-d.SET.4 size=3
   213  ----
   214  L1
   215    000001:[a#5,1-b#6,1]
   216  L2
   217    000002:[a#3,1-c#4,1]
   218  
   219  
   220  # Verify the second setupInputs call does not add an intermediate file if doing so would expand the
   221  # output level (i.e. the pc.grow logic).
   222  setup-inputs a a
   223  L1
   224    a.SET.1-b.SET.2 size=1
   225  L2
   226    a.SET.2-b.SET.3 size=1
   227    d.SET.2-f.SET.2 size=1
   228  L3
   229    b.SET.1-d.SET.1 size=1
   230    e.SET.4-f.SET.5 size=1
   231  ----
   232  L1
   233    000001:[a#1,1-b#2,1]
   234  L2
   235    000002:[a#2,1-b#3,1]
   236  L3
   237    000004:[b#1,1-d#1,1]
   238  init-multi-level(1,2,3)
   239  Original WriteAmp 2.00; ML WriteAmp 1.50
   240  Original OverlappingRatio 1.00; ML OverlappingRatio 0.50
   241  
   242  # Verify the max number of input levels equals 2.
   243  setup-inputs a a
   244  L1
   245    a.SET.1-b.SET.2 size=6
   246  L2
   247    a.SET.3-c.SET.4 size=5
   248  L3
   249    c.SET.3-d.SET.2 size=2
   250  L4
   251    c.SET.4-d.SET.3 size=1
   252  ----
   253  L1
   254    000001:[a#1,1-b#2,1]
   255  L2
   256    000002:[a#3,1-c#4,1]
   257  L3
   258    000003:[c#3,1-d#2,1]
   259  init-multi-level(1,2,3)
   260  Original WriteAmp 1.83; ML WriteAmp 1.18
   261  Original OverlappingRatio 0.83; ML OverlappingRatio 0.18
   262  
   263  # Don't init multi-level compaction if the max size limit exceeded by initial setupInputs.
   264  setup-inputs avail-bytes=10 a a
   265  L1
   266    a.SET.1-b.SET.2 size=6
   267  L2
   268    a.SET.5-b.SET.6 size=5
   269  L3
   270    a.SET.3-d.SET.4 size=3
   271  ----
   272  L1
   273    000001:[a#1,1-b#2,1]
   274  L2
   275    000002:[a#5,1-b#6,1]
   276  
   277  # During second setupInputs call, allow output level expansion even if max size
   278  # limit is exceeded, but not conduct intermediate level expansion.
   279  #
   280  # TODO(msbutler): If second setup inputs exceeds maxSize limits, should the first compaction get
   281  # returned?
   282  setup-inputs avail-bytes=20 a a
   283  L1
   284    a.SET.1-b.SET.2 size=4
   285  L2
   286    a.SET.5-b.SET.6 size=5
   287    c.SET.4-e.SET.3 size=8
   288  L3
   289    a.SET.3-d.SET.4 size=2
   290    d.SET.2-e.SET.2 size=2
   291  ----
   292  L1
   293    000001:[a#1,1-b#2,1]
   294  L2
   295    000002:[a#5,1-b#6,1]
   296  L3
   297    000004:[a#3,1-d#4,1]
   298    000005:[d#2,1-e#2,1]
   299  init-multi-level(1,2,3)
   300  Original WriteAmp 2.25; ML WriteAmp 1.44
   301  Original OverlappingRatio 1.25; ML OverlappingRatio 0.44
   302  
   303  # Don't init a multi-level compaction if the start level is L5.
   304  setup-inputs a a
   305  L5
   306    a.SET.1-b.SET.2 size=6
   307  L6
   308    a.SET.3-c.SET.4 size=5
   309  ----
   310  L5
   311    000001:[a#1,1-b#2,1]
   312  L6
   313    000002:[a#3,1-c#4,1]
   314  
   315  # Don't init a multi-level compaction if the start level is L0.
   316  setup-inputs a a
   317  L0
   318    a.SET.1-b.SET.2 size=6
   319  L1
   320    a.SET.3-c.SET.4 size=5
   321  ----
   322  L0
   323    000001:[a#1,1-b#2,1]
   324  L1
   325    000002:[a#3,1-c#4,1]
   326  
   327  # Verify a multi level compaction will not init on a compacting file.
   328  setup-inputs a a
   329  L1
   330    a.SET.1-b.SET.2 size=1
   331  L2
   332    a.SET.3-c.SET.4 size=1
   333  L3
   334    c.SET.3-d.SET.2 size=1 compacting
   335  ----
   336  L1
   337    000001:[a#1,1-b#2,1]
   338  L2
   339    000002:[a#3,1-c#4,1]