github.com/code-reading/golang@v0.0.0-20220303082512-ba5bc0e589a3/go/src/unicode/letter.go (about) 1 // Copyright 2009 The Go Authors. All rights reserved. 2 // Use of this source code is governed by a BSD-style 3 // license that can be found in the LICENSE file. 4 5 // Package unicode provides data and functions to test some properties of 6 // Unicode code points. 7 package unicode 8 9 const ( 10 MaxRune = '\U0010FFFF' // Maximum valid Unicode code point. 11 ReplacementChar = '\uFFFD' // Represents invalid code points. 12 MaxASCII = '\u007F' // maximum ASCII value. 13 MaxLatin1 = '\u00FF' // maximum Latin-1 value. 14 ) 15 16 // RangeTable defines a set of Unicode code points by listing the ranges of 17 // code points within the set. The ranges are listed in two slices 18 // to save space: a slice of 16-bit ranges and a slice of 32-bit ranges. 19 // The two slices must be in sorted order and non-overlapping. 20 // Also, R32 should contain only values >= 0x10000 (1<<16). 21 type RangeTable struct { 22 R16 []Range16 23 R32 []Range32 24 LatinOffset int // number of entries in R16 with Hi <= MaxLatin1 25 } 26 27 // Range16 represents of a range of 16-bit Unicode code points. The range runs from Lo to Hi 28 // inclusive and has the specified stride. 29 type Range16 struct { 30 Lo uint16 31 Hi uint16 32 Stride uint16 33 } 34 35 // Range32 represents of a range of Unicode code points and is used when one or 36 // more of the values will not fit in 16 bits. The range runs from Lo to Hi 37 // inclusive and has the specified stride. Lo and Hi must always be >= 1<<16. 38 type Range32 struct { 39 Lo uint32 40 Hi uint32 41 Stride uint32 42 } 43 44 // CaseRange represents a range of Unicode code points for simple (one 45 // code point to one code point) case conversion. 46 // The range runs from Lo to Hi inclusive, with a fixed stride of 1. Deltas 47 // are the number to add to the code point to reach the code point for a 48 // different case for that character. They may be negative. If zero, it 49 // means the character is in the corresponding case. There is a special 50 // case representing sequences of alternating corresponding Upper and Lower 51 // pairs. It appears with a fixed Delta of 52 // {UpperLower, UpperLower, UpperLower} 53 // The constant UpperLower has an otherwise impossible delta value. 54 type CaseRange struct { 55 Lo uint32 56 Hi uint32 57 Delta d 58 } 59 60 // SpecialCase represents language-specific case mappings such as Turkish. 61 // Methods of SpecialCase customize (by overriding) the standard mappings. 62 type SpecialCase []CaseRange 63 64 // BUG(r): There is no mechanism for full case folding, that is, for 65 // characters that involve multiple runes in the input or output. 66 67 // Indices into the Delta arrays inside CaseRanges for case mapping. 68 const ( 69 UpperCase = iota 70 LowerCase 71 TitleCase 72 MaxCase 73 ) 74 75 type d [MaxCase]rune // to make the CaseRanges text shorter 76 77 // If the Delta field of a CaseRange is UpperLower, it means 78 // this CaseRange represents a sequence of the form (say) 79 // Upper Lower Upper Lower. 80 const ( 81 UpperLower = MaxRune + 1 // (Cannot be a valid delta.) 82 ) 83 84 // linearMax is the maximum size table for linear search for non-Latin1 rune. 85 // Derived by running 'go test -calibrate'. 86 const linearMax = 18 87 88 // is16 reports whether r is in the sorted slice of 16-bit ranges. 89 func is16(ranges []Range16, r uint16) bool { 90 if len(ranges) <= linearMax || r <= MaxLatin1 { 91 for i := range ranges { 92 range_ := &ranges[i] 93 if r < range_.Lo { 94 return false 95 } 96 if r <= range_.Hi { 97 return range_.Stride == 1 || (r-range_.Lo)%range_.Stride == 0 98 } 99 } 100 return false 101 } 102 103 // binary search over ranges 104 lo := 0 105 hi := len(ranges) 106 for lo < hi { 107 m := lo + (hi-lo)/2 108 range_ := &ranges[m] 109 if range_.Lo <= r && r <= range_.Hi { 110 return range_.Stride == 1 || (r-range_.Lo)%range_.Stride == 0 111 } 112 if r < range_.Lo { 113 hi = m 114 } else { 115 lo = m + 1 116 } 117 } 118 return false 119 } 120 121 // is32 reports whether r is in the sorted slice of 32-bit ranges. 122 func is32(ranges []Range32, r uint32) bool { 123 if len(ranges) <= linearMax { 124 for i := range ranges { 125 range_ := &ranges[i] 126 if r < range_.Lo { 127 return false 128 } 129 if r <= range_.Hi { 130 return range_.Stride == 1 || (r-range_.Lo)%range_.Stride == 0 131 } 132 } 133 return false 134 } 135 136 // binary search over ranges 137 lo := 0 138 hi := len(ranges) 139 for lo < hi { 140 m := lo + (hi-lo)/2 141 range_ := ranges[m] 142 if range_.Lo <= r && r <= range_.Hi { 143 return range_.Stride == 1 || (r-range_.Lo)%range_.Stride == 0 144 } 145 if r < range_.Lo { 146 hi = m 147 } else { 148 lo = m + 1 149 } 150 } 151 return false 152 } 153 154 // Is reports whether the rune is in the specified table of ranges. 155 func Is(rangeTab *RangeTable, r rune) bool { 156 r16 := rangeTab.R16 157 // Compare as uint32 to correctly handle negative runes. 158 if len(r16) > 0 && uint32(r) <= uint32(r16[len(r16)-1].Hi) { 159 return is16(r16, uint16(r)) 160 } 161 r32 := rangeTab.R32 162 if len(r32) > 0 && r >= rune(r32[0].Lo) { 163 return is32(r32, uint32(r)) 164 } 165 return false 166 } 167 168 func isExcludingLatin(rangeTab *RangeTable, r rune) bool { 169 r16 := rangeTab.R16 170 // Compare as uint32 to correctly handle negative runes. 171 if off := rangeTab.LatinOffset; len(r16) > off && uint32(r) <= uint32(r16[len(r16)-1].Hi) { 172 return is16(r16[off:], uint16(r)) 173 } 174 r32 := rangeTab.R32 175 if len(r32) > 0 && r >= rune(r32[0].Lo) { 176 return is32(r32, uint32(r)) 177 } 178 return false 179 } 180 181 // IsUpper reports whether the rune is an upper case letter. 182 func IsUpper(r rune) bool { 183 // See comment in IsGraphic. 184 if uint32(r) <= MaxLatin1 { 185 return properties[uint8(r)]&pLmask == pLu 186 } 187 return isExcludingLatin(Upper, r) 188 } 189 190 // IsLower reports whether the rune is a lower case letter. 191 func IsLower(r rune) bool { 192 // See comment in IsGraphic. 193 if uint32(r) <= MaxLatin1 { 194 return properties[uint8(r)]&pLmask == pLl 195 } 196 return isExcludingLatin(Lower, r) 197 } 198 199 // IsTitle reports whether the rune is a title case letter. 200 func IsTitle(r rune) bool { 201 if r <= MaxLatin1 { 202 return false 203 } 204 return isExcludingLatin(Title, r) 205 } 206 207 // to maps the rune using the specified case mapping. 208 // It additionally reports whether caseRange contained a mapping for r. 209 func to(_case int, r rune, caseRange []CaseRange) (mappedRune rune, foundMapping bool) { 210 if _case < 0 || MaxCase <= _case { 211 return ReplacementChar, false // as reasonable an error as any 212 } 213 // binary search over ranges 214 lo := 0 215 hi := len(caseRange) 216 for lo < hi { 217 m := lo + (hi-lo)/2 218 cr := caseRange[m] 219 if rune(cr.Lo) <= r && r <= rune(cr.Hi) { 220 delta := cr.Delta[_case] 221 if delta > MaxRune { 222 // In an Upper-Lower sequence, which always starts with 223 // an UpperCase letter, the real deltas always look like: 224 // {0, 1, 0} UpperCase (Lower is next) 225 // {-1, 0, -1} LowerCase (Upper, Title are previous) 226 // The characters at even offsets from the beginning of the 227 // sequence are upper case; the ones at odd offsets are lower. 228 // The correct mapping can be done by clearing or setting the low 229 // bit in the sequence offset. 230 // The constants UpperCase and TitleCase are even while LowerCase 231 // is odd so we take the low bit from _case. 232 return rune(cr.Lo) + ((r-rune(cr.Lo))&^1 | rune(_case&1)), true 233 } 234 return r + delta, true 235 } 236 if r < rune(cr.Lo) { 237 hi = m 238 } else { 239 lo = m + 1 240 } 241 } 242 return r, false 243 } 244 245 // To maps the rune to the specified case: UpperCase, LowerCase, or TitleCase. 246 func To(_case int, r rune) rune { 247 r, _ = to(_case, r, CaseRanges) 248 return r 249 } 250 251 // ToUpper maps the rune to upper case. 252 func ToUpper(r rune) rune { 253 if r <= MaxASCII { 254 if 'a' <= r && r <= 'z' { 255 r -= 'a' - 'A' 256 } 257 return r 258 } 259 return To(UpperCase, r) 260 } 261 262 // ToLower maps the rune to lower case. 263 func ToLower(r rune) rune { 264 if r <= MaxASCII { 265 if 'A' <= r && r <= 'Z' { 266 r += 'a' - 'A' 267 } 268 return r 269 } 270 return To(LowerCase, r) 271 } 272 273 // ToTitle maps the rune to title case. 274 func ToTitle(r rune) rune { 275 if r <= MaxASCII { 276 if 'a' <= r && r <= 'z' { // title case is upper case for ASCII 277 r -= 'a' - 'A' 278 } 279 return r 280 } 281 return To(TitleCase, r) 282 } 283 284 // ToUpper maps the rune to upper case giving priority to the special mapping. 285 func (special SpecialCase) ToUpper(r rune) rune { 286 r1, hadMapping := to(UpperCase, r, []CaseRange(special)) 287 if r1 == r && !hadMapping { 288 r1 = ToUpper(r) 289 } 290 return r1 291 } 292 293 // ToTitle maps the rune to title case giving priority to the special mapping. 294 func (special SpecialCase) ToTitle(r rune) rune { 295 r1, hadMapping := to(TitleCase, r, []CaseRange(special)) 296 if r1 == r && !hadMapping { 297 r1 = ToTitle(r) 298 } 299 return r1 300 } 301 302 // ToLower maps the rune to lower case giving priority to the special mapping. 303 func (special SpecialCase) ToLower(r rune) rune { 304 r1, hadMapping := to(LowerCase, r, []CaseRange(special)) 305 if r1 == r && !hadMapping { 306 r1 = ToLower(r) 307 } 308 return r1 309 } 310 311 // caseOrbit is defined in tables.go as []foldPair. Right now all the 312 // entries fit in uint16, so use uint16. If that changes, compilation 313 // will fail (the constants in the composite literal will not fit in uint16) 314 // and the types here can change to uint32. 315 type foldPair struct { 316 From uint16 317 To uint16 318 } 319 320 // SimpleFold iterates over Unicode code points equivalent under 321 // the Unicode-defined simple case folding. Among the code points 322 // equivalent to rune (including rune itself), SimpleFold returns the 323 // smallest rune > r if one exists, or else the smallest rune >= 0. 324 // If r is not a valid Unicode code point, SimpleFold(r) returns r. 325 // 326 // For example: 327 // SimpleFold('A') = 'a' 328 // SimpleFold('a') = 'A' 329 // 330 // SimpleFold('K') = 'k' 331 // SimpleFold('k') = '\u212A' (Kelvin symbol, K) 332 // SimpleFold('\u212A') = 'K' 333 // 334 // SimpleFold('1') = '1' 335 // 336 // SimpleFold(-2) = -2 337 // 338 func SimpleFold(r rune) rune { 339 if r < 0 || r > MaxRune { 340 return r 341 } 342 343 if int(r) < len(asciiFold) { 344 return rune(asciiFold[r]) 345 } 346 347 // Consult caseOrbit table for special cases. 348 lo := 0 349 hi := len(caseOrbit) 350 for lo < hi { 351 m := lo + (hi-lo)/2 352 if rune(caseOrbit[m].From) < r { 353 lo = m + 1 354 } else { 355 hi = m 356 } 357 } 358 if lo < len(caseOrbit) && rune(caseOrbit[lo].From) == r { 359 return rune(caseOrbit[lo].To) 360 } 361 362 // No folding specified. This is a one- or two-element 363 // equivalence class containing rune and ToLower(rune) 364 // and ToUpper(rune) if they are different from rune. 365 if l := ToLower(r); l != r { 366 return l 367 } 368 return ToUpper(r) 369 }