github.com/codingfuture/orig-energi3@v0.8.4/README.md

## Energi Core

Official golang implementation of the Energi Core based on Ethereum protocol.

## Building the source

### Build with FutoIn CID

Local build from the source is supported via [FutoIn CID](https://futoin.org/docs/cid/).

    cid prepare
    cid build
    cid package

### (Optional) Build with Vagrant

A consistent build environment can be provided with Vagrant.

    vagrant up
    vagrant ssh builder
    cd /vagrant

From within the Vagrant environment, follow the steps to build with FutoIn CID.

### (Optional) Build with Docker

A consistent build environment can be provided with Docker. Release builds are produced through this process.

    docker build -t energi3 .

## Executables

The Energi Core project comes with several wrappers/executables found in the `cmd` directory.

| Command    | Description |
|:----------:|-------------|
| **`energi3`** | Our main Energi CLI client. It is the entry point into the Energi network (main-, test- or private net), capable of running as a full node (default), archive node (retaining all historical state) or a light node (retrieving data live). It can be used by other processes as a gateway into the Energi network via JSON RPC endpoints exposed on top of HTTP, WebSocket and/or IPC transports. `energi3 --help` and the [CLI Wiki page](https://github.com/ethereum/go-ethereum/wiki/Command-Line-Options) for command line options. |
| `abigen` | Source code generator to convert Energi contract definitions into easy to use, compile-time type-safe Go packages. It operates on plain [Ethereum contract ABIs](https://github.com/ethereum/wiki/wiki/Ethereum-Contract-ABI) with expanded functionality if the contract bytecode is also available. However it also accepts Solidity source files, making development much more streamlined. Please see our [Native DApps](https://github.com/ethereum/go-ethereum/wiki/Native-DApps:-Go-bindings-to-Ethereum-contracts) wiki page for details. |
| `bootnode` | Stripped down version of our Energi client implementation that only takes part in the network node discovery protocol, but does not run any of the higher level application protocols. It can be used as a lightweight bootstrap node to aid in finding peers in private networks. |
| `evm` | Developer utility version of the EVM (Ethereum Virtual Machine) that is capable of running bytecode snippets within a configurable environment and execution mode. Its purpose is to allow isolated, fine-grained debugging of EVM opcodes (e.g. `evm --code 60ff60ff --debug`). |
| `energi3rpctest` | Developer utility tool to support our [ethereum/rpc-test](https://github.com/ethereum/rpc-tests) test suite which validates baseline conformity to the [Ethereum JSON RPC](https://github.com/ethereum/wiki/wiki/JSON-RPC) specs. Please see the [test suite's readme](https://github.com/ethereum/rpc-tests/blob/master/README.md) for details. |
| `rlpdump` | Developer utility tool to convert binary RLP ([Recursive Length Prefix](https://github.com/ethereum/wiki/wiki/RLP)) dumps (data encoding used by the Energi protocol both network as well as consensus wise) to user friendlier hierarchical representation (e.g. `rlpdump --hex CE0183FFFFFFC4C304050583616263`). |
| `swarm`    | Swarm daemon and tools. This is the entrypoint for the Swarm network. `swarm --help` for command line options and subcommands. See [Swarm README](https://github.com/ethereum/go-ethereum/tree/master/swarm) for more information. |
| `puppeth`    | a CLI wizard that aids in creating a new Energi network. |

## Running energi3

Going through all the possible command line flags is out of scope here (please consult upstream
[CLI Wiki page](https://github.com/ethereum/go-ethereum/wiki/Command-Line-Options)), but we've
enumerated a few common parameter combos to get you up to speed quickly on how you can run your
own Energi Core instance.

### Full node on the main Energi network

By far the most common scenario is people wanting to simply interact with the Energi network:
create accounts; transfer funds; deploy and interact with contracts. For this particular use-case
the user doesn't care about years-old historical data, so we can fast-sync quickly to the current
state of the network. To do so:

```
$ energi3 console
```

This command will:

 * Start energi3 in fast sync mode (default, can be changed with the `--syncmode` flag), causing it to
   download more data in exchange for avoiding processing the entire history of the Energi network,
   which is very CPU intensive.
 * Start up Energi Core's built-in interactive [JavaScript console](https://github.com/ethereum/go-ethereum/wiki/JavaScript-Console),
   (via the trailing `console` subcommand) through which you can invoke all official [`web3` methods](https://github.com/ethereum/wiki/wiki/JavaScript-API)
   as well as Energi Core's own [management APIs](https://github.com/ethereum/go-ethereum/wiki/Management-APIs).
   This tool is optional and if you leave it out you can always attach to an already running Energi Core instance
   with `energi3 attach`.

### Full node on the Energi test network

Transitioning towards developers, if you'd like to play around with creating Energi contracts, you
almost certainly would like to do that without any real money involved until you get the hang of the
entire system. In other words, instead of attaching to the main network, you want to join the **test**
network with your node, which is fully equivalent to the main network, but with play-Ether only.

```
$ energi3 --testnet console
```

The `console` subcommand have the exact same meaning as above and they are equally useful on the
testnet too. Please see above for their explanations if you've skipped to here.

Specifying the `--testnet` flag however will reconfigure your Energi Core instance a bit:

 * Instead of using the default data directory (`~/.ethereum` on Linux for example), Energi Core will nest
   itself one level deeper into a `testnet` subfolder (`~/.ethereum/testnet` on Linux). Note, on OSX
   and Linux this also means that attaching to a running testnet node requires the use of a custom
   endpoint since `energi3 attach` will try to attach to a production node endpoint by default. E.g.
   `energi3 attach <datadir>/testnet/energi3.ipc`. Windows users are not affected by this.
 * Instead of connecting the main Energi network, the client will connect to the test network,
   which uses different P2P bootnodes, different network IDs and genesis states.

*Note: Although there are some internal protective measures to prevent transactions from crossing
over between the main network and test network, you should make sure to always use separate accounts
for play-money and real-money. Unless you manually move accounts, Energi Core will by default correctly
separate the two networks and will not make any accounts available between them.*
`

### Configuration

As an alternative to passing the numerous flags to the `energi3` binary, you can also pass a configuration file via:

```
$ energi3 --config /path/to/your_config.toml
```

To get an idea how the file should look like you can use the `dumpconfig` subcommand to export your existing configuration:

```
$ energi3 --your-favourite-flags dumpconfig
```

*Note: This works only with energi3 v1.6.0 and above.*

#### Docker quick start

One of the quickest ways to get Energi up and running on your machine is by using Docker:

```
docker run -d --name ethereum-node -v /Users/alice/ethereum:/root \
           -p 39796:39796 -p 39797:39797 \
           ethereum/client-go
```

This will start energi3 in fast-sync mode with a DB memory allowance of 1GB just as the above command does.  It will also create a persistent volume in your home directory for saving your blockchain as well as map the default ports. There is also an `alpine` tag available for a slim version of the image.

Do not forget `--rpcaddr 0.0.0.0`, if you want to access RPC from other containers and/or hosts. By default, `energi3` binds to the local interface and RPC endpoints is not accessible from the outside.

### Programatically interfacing Energi Core nodes

As a developer, sooner rather than later you'll want to start interacting with Energi Core and the Energi
network via your own programs and not manually through the console. To aid this, Energi Core has built-in
support for a JSON-RPC based APIs ([standard APIs](https://github.com/ethereum/wiki/wiki/JSON-RPC) and
[Energi Core specific APIs](https://github.com/ethereum/go-ethereum/wiki/Management-APIs)). These can be
exposed via HTTP, WebSockets and IPC (unix sockets on unix based platforms, and named pipes on Windows).

The IPC interface is enabled by default and exposes all the APIs supported by Energi Core, whereas the HTTP
and WS interfaces need to manually be enabled and only expose a subset of APIs due to security reasons.
These can be turned on/off and configured as you'd expect.

HTTP based JSON-RPC API options:

  * `--rpc` Enable the HTTP-RPC server
  * `--rpcaddr` HTTP-RPC server listening interface (default: "localhost")
  * `--rpcport` HTTP-RPC server listening port (default: 39796)
  * `--rpcapi` API's offered over the HTTP-RPC interface (default: "eth,net,web3")
  * `--rpccorsdomain` Comma separated list of domains from which to accept cross origin requests (browser enforced)
  * `--ws` Enable the WS-RPC server
  * `--wsaddr` WS-RPC server listening interface (default: "localhost")
  * `--wsport` WS-RPC server listening port (default: 39795)
  * `--wsapi` API's offered over the WS-RPC interface (default: "eth,net,web3")
  * `--wsorigins` Origins from which to accept websockets requests
  * `--ipcdisable` Disable the IPC-RPC server
  * `--ipcapi` API's offered over the IPC-RPC interface (default: "admin,debug,eth,miner,net,personal,shh,txpool,web3")
  * `--ipcpath` Filename for IPC socket/pipe within the datadir (explicit paths escape it)

You'll need to use your own programming environments' capabilities (libraries, tools, etc) to connect
via HTTP, WS or IPC to a Energi Core node configured with the above flags and you'll need to speak [JSON-RPC](https://www.jsonrpc.org/specification)
on all transports. You can reuse the same connection for multiple requests!

**Note: Please understand the security implications of opening up an HTTP/WS based transport before
doing so! Hackers on the internet are actively trying to subvert Ethereum nodes with exposed APIs!
Further, all browser tabs can access locally running webservers, so malicious webpages could try to
subvert locally available APIs!**

### Operating a private network

Maintaining your own private network is more involved as a lot of configurations taken for granted in
the official networks need to be manually set up.

#### Defining the private genesis state

First, you'll need to create the genesis state of your networks, which all nodes need to be aware of
and agree upon. This consists of a small JSON file (e.g. call it `genesis.json`):

```json
{
  "config": {
        "chainId": 0,
        "homesteadBlock": 0,
        "eip155Block": 0,
        "eip158Block": 0
    },
  "alloc"      : {},
  "coinbase"   : "0x0000000000000000000000000000000000000000",
  "difficulty" : "0x20000",
  "extraData"  : "",
  "gasLimit"   : "0x2fefd8",
  "nonce"      : "0x0000000000000042",
  "mixhash"    : "0x0000000000000000000000000000000000000000000000000000000000000000",
  "parentHash" : "0x0000000000000000000000000000000000000000000000000000000000000000",
  "timestamp"  : "0x00"
}
```

The above fields should be fine for most purposes, although we'd recommend changing the `nonce` to
some random value so you prevent unknown remote nodes from being able to connect to you. If you'd
like to pre-fund some accounts for easier testing, you can populate the `alloc` field with account
configs:

```json
"alloc": {
  "0x0000000000000000000000000000000000000001": {"balance": "111111111"},
  "0x0000000000000000000000000000000000000002": {"balance": "222222222"}
}
```

With the genesis state defined in the above JSON file, you'll need to initialize **every** Energi Core node
with it prior to starting it up to ensure all blockchain parameters are correctly set:

```
$ energi3 init path/to/genesis.json
```

#### Creating the rendezvous point

With all nodes that you want to run initialized to the desired genesis state, you'll need to start a
bootstrap node that others can use to find each other in your network and/or over the internet. The
clean way is to configure and run a dedicated bootnode:

```
$ bootnode --genkey=boot.key
$ bootnode --nodekey=boot.key
```

With the bootnode online, it will display an [`enode` URL](https://github.com/ethereum/wiki/wiki/enode-url-format)
that other nodes can use to connect to it and exchange peer information. Make sure to replace the
displayed IP address information (most probably `[::]`) with your externally accessible IP to get the
actual `enode` URL.

*Note: You could also use a full fledged Energi Core node as a bootnode, but it's the less recommended way.*

#### Starting up your member nodes

With the bootnode operational and externally reachable (you can try `telnet <ip> <port>` to ensure
it's indeed reachable), start every subsequent Energi Core node pointed to the bootnode for peer discovery
via the `--bootnodes` flag. It will probably also be desirable to keep the data directory of your
private network separated, so do also specify a custom `--datadir` flag.

```
$ energi3 --datadir=path/to/custom/data/folder --bootnodes=<bootnode-enode-url-from-above>
```

*Note: Since your network will be completely cut off from the main and test networks, you'll also
need to configure a miner to process transactions and create new blocks for you.*

## License

The Energi Core library (i.e. all code outside of the `cmd` directory) is licensed under the
[GNU Lesser General Public License v3.0](https://www.gnu.org/licenses/lgpl-3.0.en.html), also
included in our repository in the `COPYING.LESSER` file.

The Energi Core binaries (i.e. all code inside of the `cmd` directory) is licensed under the
[GNU General Public License v3.0](https://www.gnu.org/licenses/gpl-3.0.en.html), also included
in our repository in the `COPYING` file.