github.com/gagliardetto/golang-go@v0.0.0-20201020153340-53909ea70814/cmd/internal/obj/riscv/cpu.go (about)

     1  //	Copyright © 1994-1999 Lucent Technologies Inc.  All rights reserved.
     2  //	Portions Copyright © 1995-1997 C H Forsyth (forsyth@terzarima.net)
     3  //	Portions Copyright © 1997-1999 Vita Nuova Limited
     4  //	Portions Copyright © 2000-2008 Vita Nuova Holdings Limited (www.vitanuova.com)
     5  //	Portions Copyright © 2004,2006 Bruce Ellis
     6  //	Portions Copyright © 2005-2007 C H Forsyth (forsyth@terzarima.net)
     7  //	Revisions Copyright © 2000-2008 Lucent Technologies Inc. and others
     8  //	Portions Copyright © 2009 The Go Authors.  All rights reserved.
     9  //	Portions Copyright © 2019 The Go Authors.  All rights reserved.
    10  //
    11  // Permission is hereby granted, free of charge, to any person obtaining a copy
    12  // of this software and associated documentation files (the "Software"), to deal
    13  // in the Software without restriction, including without limitation the rights
    14  // to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
    15  // copies of the Software, and to permit persons to whom the Software is
    16  // furnished to do so, subject to the following conditions:
    17  //
    18  // The above copyright notice and this permission notice shall be included in
    19  // all copies or substantial portions of the Software.
    20  //
    21  // THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
    22  // IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
    23  // FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL THE
    24  // AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
    25  // LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
    26  // OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
    27  // THE SOFTWARE.
    28  
    29  package riscv
    30  
    31  import "github.com/gagliardetto/golang-go/cmd/internal/obj"
    32  
    33  //go:generate go run ../stringer.go -i $GOFILE -o anames.go -p riscv
    34  
    35  const (
    36  	// Base register numberings.
    37  	REG_X0 = obj.RBaseRISCV + iota
    38  	REG_X1
    39  	REG_X2
    40  	REG_X3
    41  	REG_X4
    42  	REG_X5
    43  	REG_X6
    44  	REG_X7
    45  	REG_X8
    46  	REG_X9
    47  	REG_X10
    48  	REG_X11
    49  	REG_X12
    50  	REG_X13
    51  	REG_X14
    52  	REG_X15
    53  	REG_X16
    54  	REG_X17
    55  	REG_X18
    56  	REG_X19
    57  	REG_X20
    58  	REG_X21
    59  	REG_X22
    60  	REG_X23
    61  	REG_X24
    62  	REG_X25
    63  	REG_X26
    64  	REG_X27
    65  	REG_X28
    66  	REG_X29
    67  	REG_X30
    68  	REG_X31
    69  
    70  	// FP register numberings.
    71  	REG_F0
    72  	REG_F1
    73  	REG_F2
    74  	REG_F3
    75  	REG_F4
    76  	REG_F5
    77  	REG_F6
    78  	REG_F7
    79  	REG_F8
    80  	REG_F9
    81  	REG_F10
    82  	REG_F11
    83  	REG_F12
    84  	REG_F13
    85  	REG_F14
    86  	REG_F15
    87  	REG_F16
    88  	REG_F17
    89  	REG_F18
    90  	REG_F19
    91  	REG_F20
    92  	REG_F21
    93  	REG_F22
    94  	REG_F23
    95  	REG_F24
    96  	REG_F25
    97  	REG_F26
    98  	REG_F27
    99  	REG_F28
   100  	REG_F29
   101  	REG_F30
   102  	REG_F31
   103  
   104  	// This marks the end of the register numbering.
   105  	REG_END
   106  
   107  	// General registers reassigned to ABI names.
   108  	REG_ZERO = REG_X0
   109  	REG_RA   = REG_X1
   110  	REG_SP   = REG_X2
   111  	REG_GP   = REG_X3 // aka REG_SB
   112  	REG_TP   = REG_X4 // aka REG_G
   113  	REG_T0   = REG_X5
   114  	REG_T1   = REG_X6
   115  	REG_T2   = REG_X7
   116  	REG_S0   = REG_X8
   117  	REG_S1   = REG_X9
   118  	REG_A0   = REG_X10
   119  	REG_A1   = REG_X11
   120  	REG_A2   = REG_X12
   121  	REG_A3   = REG_X13
   122  	REG_A4   = REG_X14
   123  	REG_A5   = REG_X15
   124  	REG_A6   = REG_X16
   125  	REG_A7   = REG_X17
   126  	REG_S2   = REG_X18
   127  	REG_S3   = REG_X19
   128  	REG_S4   = REG_X20
   129  	REG_S5   = REG_X21
   130  	REG_S6   = REG_X22
   131  	REG_S7   = REG_X23
   132  	REG_S8   = REG_X24
   133  	REG_S9   = REG_X25
   134  	REG_S10  = REG_X26
   135  	REG_S11  = REG_X27
   136  	REG_T3   = REG_X28
   137  	REG_T4   = REG_X29
   138  	REG_T5   = REG_X30
   139  	REG_T6   = REG_X31
   140  
   141  	// Go runtime register names.
   142  	REG_G    = REG_TP // G pointer.
   143  	REG_CTXT = REG_S4 // Context for closures.
   144  	REG_LR   = REG_RA // Link register.
   145  	REG_TMP  = REG_T6 // Reserved for assembler use.
   146  
   147  	// ABI names for floating point registers.
   148  	REG_FT0  = REG_F0
   149  	REG_FT1  = REG_F1
   150  	REG_FT2  = REG_F2
   151  	REG_FT3  = REG_F3
   152  	REG_FT4  = REG_F4
   153  	REG_FT5  = REG_F5
   154  	REG_FT6  = REG_F6
   155  	REG_FT7  = REG_F7
   156  	REG_FS0  = REG_F8
   157  	REG_FS1  = REG_F9
   158  	REG_FA0  = REG_F10
   159  	REG_FA1  = REG_F11
   160  	REG_FA2  = REG_F12
   161  	REG_FA3  = REG_F13
   162  	REG_FA4  = REG_F14
   163  	REG_FA5  = REG_F15
   164  	REG_FA6  = REG_F16
   165  	REG_FA7  = REG_F17
   166  	REG_FS2  = REG_F18
   167  	REG_FS3  = REG_F19
   168  	REG_FS4  = REG_F20
   169  	REG_FS5  = REG_F21
   170  	REG_FS6  = REG_F22
   171  	REG_FS7  = REG_F23
   172  	REG_FS8  = REG_F24
   173  	REG_FS9  = REG_F25
   174  	REG_FS10 = REG_F26
   175  	REG_FS11 = REG_F27
   176  	REG_FT8  = REG_F28
   177  	REG_FT9  = REG_F29
   178  	REG_FT10 = REG_F30
   179  	REG_FT11 = REG_F31
   180  
   181  	// Names generated by the SSA compiler.
   182  	REGSP = REG_SP
   183  	REGG  = REG_G
   184  )
   185  
   186  // https://github.com/riscv/riscv-elf-psabi-doc/blob/master/riscv-elf.md#dwarf-register-numbers
   187  var RISCV64DWARFRegisters = map[int16]int16{
   188  	// Integer Registers.
   189  	REG_X0:  0,
   190  	REG_X1:  1,
   191  	REG_X2:  2,
   192  	REG_X3:  3,
   193  	REG_X4:  4,
   194  	REG_X5:  5,
   195  	REG_X6:  6,
   196  	REG_X7:  7,
   197  	REG_X8:  8,
   198  	REG_X9:  9,
   199  	REG_X10: 10,
   200  	REG_X11: 11,
   201  	REG_X12: 12,
   202  	REG_X13: 13,
   203  	REG_X14: 14,
   204  	REG_X15: 15,
   205  	REG_X16: 16,
   206  	REG_X17: 17,
   207  	REG_X18: 18,
   208  	REG_X19: 19,
   209  	REG_X20: 20,
   210  	REG_X21: 21,
   211  	REG_X22: 22,
   212  	REG_X23: 23,
   213  	REG_X24: 24,
   214  	REG_X25: 25,
   215  	REG_X26: 26,
   216  	REG_X27: 27,
   217  	REG_X28: 28,
   218  	REG_X29: 29,
   219  	REG_X30: 30,
   220  	REG_X31: 31,
   221  
   222  	// Floating-Point Registers.
   223  	REG_F0:  32,
   224  	REG_F1:  33,
   225  	REG_F2:  34,
   226  	REG_F3:  35,
   227  	REG_F4:  36,
   228  	REG_F5:  37,
   229  	REG_F6:  38,
   230  	REG_F7:  39,
   231  	REG_F8:  40,
   232  	REG_F9:  41,
   233  	REG_F10: 42,
   234  	REG_F11: 43,
   235  	REG_F12: 44,
   236  	REG_F13: 45,
   237  	REG_F14: 46,
   238  	REG_F15: 47,
   239  	REG_F16: 48,
   240  	REG_F17: 49,
   241  	REG_F18: 50,
   242  	REG_F19: 51,
   243  	REG_F20: 52,
   244  	REG_F21: 53,
   245  	REG_F22: 54,
   246  	REG_F23: 55,
   247  	REG_F24: 56,
   248  	REG_F25: 57,
   249  	REG_F26: 58,
   250  	REG_F27: 59,
   251  	REG_F28: 60,
   252  	REG_F29: 61,
   253  	REG_F30: 62,
   254  	REG_F31: 63,
   255  }
   256  
   257  // Prog.Mark flags.
   258  const (
   259  	// NEED_PCREL_ITYPE_RELOC is set on AUIPC instructions to indicate that
   260  	// it is the first instruction in an AUIPC + I-type pair that needs a
   261  	// R_RISCV_PCREL_ITYPE relocation.
   262  	NEED_PCREL_ITYPE_RELOC = 1 << 0
   263  
   264  	// NEED_PCREL_STYPE_RELOC is set on AUIPC instructions to indicate that
   265  	// it is the first instruction in an AUIPC + S-type pair that needs a
   266  	// R_RISCV_PCREL_STYPE relocation.
   267  	NEED_PCREL_STYPE_RELOC = 1 << 1
   268  )
   269  
   270  // RISC-V mnemonics, as defined in the "opcodes" and "opcodes-pseudo" files
   271  // from:
   272  //
   273  //    https://github.com/riscv/riscv-opcodes
   274  //
   275  // As well as some pseudo-mnemonics (e.g. MOV) used only in the assembler.
   276  //
   277  // See also "The RISC-V Instruction Set Manual" at:
   278  //
   279  //    https://riscv.org/specifications/
   280  //
   281  // If you modify this table, you MUST run 'go generate' to regenerate anames.go!
   282  const (
   283  	// Unprivileged ISA (Document Version 20190608-Base-Ratified)
   284  
   285  	// 2.4: Integer Computational Instructions
   286  	AADDI = obj.ABaseRISCV + obj.A_ARCHSPECIFIC + iota
   287  	ASLTI
   288  	ASLTIU
   289  	AANDI
   290  	AORI
   291  	AXORI
   292  	ASLLI
   293  	ASRLI
   294  	ASRAI
   295  	ALUI
   296  	AAUIPC
   297  	AADD
   298  	ASLT
   299  	ASLTU
   300  	AAND
   301  	AOR
   302  	AXOR
   303  	ASLL
   304  	ASRL
   305  	ASUB
   306  	ASRA
   307  
   308  	// The SLL/SRL/SRA instructions differ slightly between RV32 and RV64,
   309  	// hence there are pseudo-opcodes for the RV32 specific versions.
   310  	ASLLIRV32
   311  	ASRLIRV32
   312  	ASRAIRV32
   313  
   314  	// 2.5: Control Transfer Instructions
   315  	AJAL
   316  	AJALR
   317  	ABEQ
   318  	ABNE
   319  	ABLT
   320  	ABLTU
   321  	ABGE
   322  	ABGEU
   323  
   324  	// 2.6: Load and Store Instructions
   325  	ALW
   326  	ALWU
   327  	ALH
   328  	ALHU
   329  	ALB
   330  	ALBU
   331  	ASW
   332  	ASH
   333  	ASB
   334  
   335  	// 2.7: Memory Ordering Instructions
   336  	AFENCE
   337  	AFENCEI
   338  	AFENCETSO
   339  
   340  	// 5.2: Integer Computational Instructions (RV64I)
   341  	AADDIW
   342  	ASLLIW
   343  	ASRLIW
   344  	ASRAIW
   345  	AADDW
   346  	ASLLW
   347  	ASRLW
   348  	ASUBW
   349  	ASRAW
   350  
   351  	// 5.3: Load and Store Instructions (RV64I)
   352  	ALD
   353  	ASD
   354  
   355  	// 7.1: Multiplication Operations
   356  	AMUL
   357  	AMULH
   358  	AMULHU
   359  	AMULHSU
   360  	AMULW
   361  	ADIV
   362  	ADIVU
   363  	AREM
   364  	AREMU
   365  	ADIVW
   366  	ADIVUW
   367  	AREMW
   368  	AREMUW
   369  
   370  	// 8.2: Load-Reserved/Store-Conditional Instructions
   371  	ALRD
   372  	ASCD
   373  	ALRW
   374  	ASCW
   375  
   376  	// 8.3: Atomic Memory Operations
   377  	AAMOSWAPD
   378  	AAMOADDD
   379  	AAMOANDD
   380  	AAMOORD
   381  	AAMOXORD
   382  	AAMOMAXD
   383  	AAMOMAXUD
   384  	AAMOMIND
   385  	AAMOMINUD
   386  	AAMOSWAPW
   387  	AAMOADDW
   388  	AAMOANDW
   389  	AAMOORW
   390  	AAMOXORW
   391  	AAMOMAXW
   392  	AAMOMAXUW
   393  	AAMOMINW
   394  	AAMOMINUW
   395  
   396  	// 10.1: Base Counters and Timers
   397  	ARDCYCLE
   398  	ARDCYCLEH
   399  	ARDTIME
   400  	ARDTIMEH
   401  	ARDINSTRET
   402  	ARDINSTRETH
   403  
   404  	// 11.2: Floating-Point Control and Status Register
   405  	AFRCSR
   406  	AFSCSR
   407  	AFRRM
   408  	AFSRM
   409  	AFRFLAGS
   410  	AFSFLAGS
   411  	AFSRMI
   412  	AFSFLAGSI
   413  
   414  	// 11.5: Single-Precision Load and Store Instructions
   415  	AFLW
   416  	AFSW
   417  
   418  	// 11.6: Single-Precision Floating-Point Computational Instructions
   419  	AFADDS
   420  	AFSUBS
   421  	AFMULS
   422  	AFDIVS
   423  	AFMINS
   424  	AFMAXS
   425  	AFSQRTS
   426  	AFMADDS
   427  	AFMSUBS
   428  	AFNMADDS
   429  	AFNMSUBS
   430  
   431  	// 11.7: Single-Precision Floating-Point Conversion and Move Instructions
   432  	AFCVTWS
   433  	AFCVTLS
   434  	AFCVTSW
   435  	AFCVTSL
   436  	AFCVTWUS
   437  	AFCVTLUS
   438  	AFCVTSWU
   439  	AFCVTSLU
   440  	AFSGNJS
   441  	AFSGNJNS
   442  	AFSGNJXS
   443  	AFMVXS
   444  	AFMVSX
   445  	AFMVXW
   446  	AFMVWX
   447  
   448  	// 11.8: Single-Precision Floating-Point Compare Instructions
   449  	AFEQS
   450  	AFLTS
   451  	AFLES
   452  
   453  	// 11.9: Single-Precision Floating-Point Classify Instruction
   454  	AFCLASSS
   455  
   456  	// 12.3: Double-Precision Load and Store Instructions
   457  	AFLD
   458  	AFSD
   459  
   460  	// 12.4: Double-Precision Floating-Point Computational Instructions
   461  	AFADDD
   462  	AFSUBD
   463  	AFMULD
   464  	AFDIVD
   465  	AFMIND
   466  	AFMAXD
   467  	AFSQRTD
   468  	AFMADDD
   469  	AFMSUBD
   470  	AFNMADDD
   471  	AFNMSUBD
   472  
   473  	// 12.5: Double-Precision Floating-Point Conversion and Move Instructions
   474  	AFCVTWD
   475  	AFCVTLD
   476  	AFCVTDW
   477  	AFCVTDL
   478  	AFCVTWUD
   479  	AFCVTLUD
   480  	AFCVTDWU
   481  	AFCVTDLU
   482  	AFCVTSD
   483  	AFCVTDS
   484  	AFSGNJD
   485  	AFSGNJND
   486  	AFSGNJXD
   487  	AFMVXD
   488  	AFMVDX
   489  
   490  	// 12.6: Double-Precision Floating-Point Compare Instructions
   491  	AFEQD
   492  	AFLTD
   493  	AFLED
   494  
   495  	// 12.7: Double-Precision Floating-Point Classify Instruction
   496  	AFCLASSD
   497  
   498  	// 13.1 Quad-Precision Load and Store Instructions
   499  	AFLQ
   500  	AFSQ
   501  
   502  	// 13.2: Quad-Precision Computational Instructions
   503  	AFADDQ
   504  	AFSUBQ
   505  	AFMULQ
   506  	AFDIVQ
   507  	AFMINQ
   508  	AFMAXQ
   509  	AFSQRTQ
   510  	AFMADDQ
   511  	AFMSUBQ
   512  	AFNMADDQ
   513  	AFNMSUBQ
   514  
   515  	// 13.3 Quad-Precision Convert and Move Instructions
   516  	AFCVTWQ
   517  	AFCVTLQ
   518  	AFCVTSQ
   519  	AFCVTDQ
   520  	AFCVTQW
   521  	AFCVTQL
   522  	AFCVTQS
   523  	AFCVTQD
   524  	AFCVTWUQ
   525  	AFCVTLUQ
   526  	AFCVTQWU
   527  	AFCVTQLU
   528  	AFSGNJQ
   529  	AFSGNJNQ
   530  	AFSGNJXQ
   531  	AFMVXQ
   532  	AFMVQX
   533  
   534  	// 13.4 Quad-Precision Floating-Point Compare Instructions
   535  	AFEQQ
   536  	AFLEQ
   537  	AFLTQ
   538  
   539  	// 13.5 Quad-Precision Floating-Point Classify Instruction
   540  	AFCLASSQ
   541  
   542  	// Privileged ISA (Version 20190608-Priv-MSU-Ratified)
   543  
   544  	// 3.1.9: Instructions to Access CSRs
   545  	ACSRRW
   546  	ACSRRS
   547  	ACSRRC
   548  	ACSRRWI
   549  	ACSRRSI
   550  	ACSRRCI
   551  
   552  	// 3.2.1: Environment Call and Breakpoint
   553  	AECALL
   554  	ASCALL
   555  	AEBREAK
   556  	ASBREAK
   557  
   558  	// 3.2.2: Trap-Return Instructions
   559  	AMRET
   560  	ASRET
   561  	AURET
   562  	ADRET
   563  
   564  	// 3.2.3: Wait for Interrupt
   565  	AWFI
   566  
   567  	// 4.2.1: Supervisor Memory-Management Fence Instruction
   568  	ASFENCEVMA
   569  
   570  	// Hypervisor Memory-Management Instructions
   571  	AHFENCEGVMA
   572  	AHFENCEVVMA
   573  
   574  	// The escape hatch. Inserts a single 32-bit word.
   575  	AWORD
   576  
   577  	// Pseudo-instructions.  These get translated by the assembler into other
   578  	// instructions, based on their operands.
   579  	AFNEGD
   580  	AFNEGS
   581  	AFNED
   582  	AFNES
   583  	AMOV
   584  	AMOVB
   585  	AMOVBU
   586  	AMOVF
   587  	AMOVD
   588  	AMOVH
   589  	AMOVHU
   590  	AMOVW
   591  	AMOVWU
   592  	ASEQZ
   593  	ASNEZ
   594  
   595  	// End marker
   596  	ALAST
   597  )
   598  
   599  // All unary instructions which write to their arguments (as opposed to reading
   600  // from them) go here. The assembly parser uses this information to populate
   601  // its AST in a semantically reasonable way.
   602  //
   603  // Any instructions not listed here are assumed to either be non-unary or to read
   604  // from its argument.
   605  var unaryDst = map[obj.As]bool{
   606  	ARDCYCLE:    true,
   607  	ARDCYCLEH:   true,
   608  	ARDTIME:     true,
   609  	ARDTIMEH:    true,
   610  	ARDINSTRET:  true,
   611  	ARDINSTRETH: true,
   612  }
   613  
   614  // Instruction encoding masks.
   615  const (
   616  	// ITypeImmMask is a mask including only the immediate portion of
   617  	// I-type instructions.
   618  	ITypeImmMask = 0xfff00000
   619  
   620  	// STypeImmMask is a mask including only the immediate portion of
   621  	// S-type instructions.
   622  	STypeImmMask = 0xfe000f80
   623  
   624  	// UTypeImmMask is a mask including only the immediate portion of
   625  	// U-type instructions.
   626  	UTypeImmMask = 0xfffff000
   627  
   628  	// UJTypeImmMask is a mask including only the immediate portion of
   629  	// UJ-type instructions.
   630  	UJTypeImmMask = UTypeImmMask
   631  )