github.com/metacubex/gvisor@v0.0.0-20240320004321-933faba989ec/pkg/tcpip/link/sniffer/sniffer.go

// Copyright 2018 The gVisor Authors.
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
//     http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.

// Package sniffer provides the implementation of data-link layer endpoints that
// wrap another endpoint and logs inbound and outbound packets.
//
// Sniffer endpoints can be used in the networking stack by calling New(eID) to
// create a new endpoint, where eID is the ID of the endpoint being wrapped,
// and then passing it as an argument to Stack.CreateNIC().
package sniffer

import (
	"encoding/binary"
	"fmt"
	"io"
	"time"

	"github.com/metacubex/gvisor/pkg/atomicbitops"
	"github.com/metacubex/gvisor/pkg/log"
	"github.com/metacubex/gvisor/pkg/tcpip"
	"github.com/metacubex/gvisor/pkg/tcpip/header"
	"github.com/metacubex/gvisor/pkg/tcpip/header/parse"
	"github.com/metacubex/gvisor/pkg/tcpip/link/nested"
	"github.com/metacubex/gvisor/pkg/tcpip/stack"
)

// LogPackets is a flag used to enable or disable packet logging via the log
// package. Valid values are 0 or 1.
var LogPackets atomicbitops.Uint32 = atomicbitops.FromUint32(1)

// LogPacketsToPCAP is a flag used to enable or disable logging packets to a
// pcap writer. Valid values are 0 or 1. A writer must have been specified when the
// sniffer was created for this flag to have effect.
var LogPacketsToPCAP atomicbitops.Uint32 = atomicbitops.FromUint32(1)

type endpoint struct {
	nested.Endpoint
	writer     io.Writer
	maxPCAPLen uint32
	logPrefix  string
}

var _ stack.GSOEndpoint = (*endpoint)(nil)
var _ stack.LinkEndpoint = (*endpoint)(nil)
var _ stack.NetworkDispatcher = (*endpoint)(nil)

// A Direction indicates whether the packing is being sent or received.
type Direction int

const (
	// DirectionSend indicates a sent packet.
	DirectionSend = iota
	// DirectionRecv indicates a received packet.
	DirectionRecv
)

// New creates a new sniffer link-layer endpoint. It wraps around another
// endpoint and logs packets and they traverse the endpoint.
func New(lower stack.LinkEndpoint) stack.LinkEndpoint {
	return NewWithPrefix(lower, "")
}

// NewWithPrefix creates a new sniffer link-layer endpoint. It wraps around
// another endpoint and logs packets prefixed with logPrefix as they traverse
// the endpoint.
//
// logPrefix is prepended to the log line without any separators.
// E.g. logPrefix = "NIC:en0/" will produce log lines like
// "NIC:en0/send udp [...]".
func NewWithPrefix(lower stack.LinkEndpoint, logPrefix string) stack.LinkEndpoint {
	sniffer := &endpoint{logPrefix: logPrefix}
	sniffer.Endpoint.Init(lower, sniffer)
	return sniffer
}

func zoneOffset() (int32, error) {
	date := time.Date(0, 0, 0, 0, 0, 0, 0, time.Local)
	_, offset := date.Zone()
	return int32(offset), nil
}

func writePCAPHeader(w io.Writer, maxLen uint32) error {
	offset, err := zoneOffset()
	if err != nil {
		return err
	}
	return binary.Write(w, binary.LittleEndian, pcapHeader{
		// From https://wiki.wireshark.org/Development/LibpcapFileFormat
		MagicNumber: 0xa1b2c3d4,

		VersionMajor: 2,
		VersionMinor: 4,
		Thiszone:     offset,
		Sigfigs:      0,
		Snaplen:      maxLen,
		Network:      101, // LINKTYPE_RAW
	})
}

// NewWithWriter creates a new sniffer link-layer endpoint. It wraps around
// another endpoint and logs packets as they traverse the endpoint.
//
// Each packet is written to writer in the pcap format in a single Write call
// without synchronization. A sniffer created with this function will not emit
// packets using the standard log package.
//
// snapLen is the maximum amount of a packet to be saved. Packets with a length
// less than or equal to snapLen will be saved in their entirety. Longer
// packets will be truncated to snapLen.
func NewWithWriter(lower stack.LinkEndpoint, writer io.Writer, snapLen uint32) (stack.LinkEndpoint, error) {
	if err := writePCAPHeader(writer, snapLen); err != nil {
		return nil, err
	}
	sniffer := &endpoint{
		writer:     writer,
		maxPCAPLen: snapLen,
	}
	sniffer.Endpoint.Init(lower, sniffer)
	return sniffer, nil
}

// DeliverNetworkPacket implements the stack.NetworkDispatcher interface. It is
// called by the link-layer endpoint being wrapped when a packet arrives, and
// logs the packet before forwarding to the actual dispatcher.
func (e *endpoint) DeliverNetworkPacket(protocol tcpip.NetworkProtocolNumber, pkt *stack.PacketBuffer) {
	e.dumpPacket(DirectionRecv, protocol, pkt)
	e.Endpoint.DeliverNetworkPacket(protocol, pkt)
}

func (e *endpoint) dumpPacket(dir Direction, protocol tcpip.NetworkProtocolNumber, pkt *stack.PacketBuffer) {
	writer := e.writer
	if writer == nil && LogPackets.Load() == 1 {
		LogPacket(e.logPrefix, dir, protocol, pkt)
	}
	if writer != nil && LogPacketsToPCAP.Load() == 1 {
		packet := pcapPacket{
			timestamp:     time.Now(),
			packet:        pkt,
			maxCaptureLen: int(e.maxPCAPLen),
		}
		b, err := packet.MarshalBinary()
		if err != nil {
			panic(err)
		}
		if _, err := writer.Write(b); err != nil {
			panic(err)
		}
	}
}

// WritePackets implements the stack.LinkEndpoint interface. It is called by
// higher-level protocols to write packets; it just logs the packet and
// forwards the request to the lower endpoint.
func (e *endpoint) WritePackets(pkts stack.PacketBufferList) (int, tcpip.Error) {
	for _, pkt := range pkts.AsSlice() {
		e.dumpPacket(DirectionSend, pkt.NetworkProtocolNumber, pkt)
	}
	return e.Endpoint.WritePackets(pkts)
}

// LogPacket logs a packet to stdout.
func LogPacket(prefix string, dir Direction, protocol tcpip.NetworkProtocolNumber, pkt *stack.PacketBuffer) {
	// Figure out the network layer info.
	var transProto uint8
	var src tcpip.Address
	var dst tcpip.Address
	var size uint16
	var id uint32
	var fragmentOffset uint16
	var moreFragments bool

	var directionPrefix string
	switch dir {
	case DirectionSend:
		directionPrefix = "send"
	case DirectionRecv:
		directionPrefix = "recv"
	default:
		panic(fmt.Sprintf("unrecognized direction: %d", dir))
	}

	clone := trimmedClone(pkt)
	defer clone.DecRef()
	switch protocol {
	case header.IPv4ProtocolNumber:
		if ok := parse.IPv4(clone); !ok {
			return
		}

		ipv4 := header.IPv4(clone.NetworkHeader().Slice())
		fragmentOffset = ipv4.FragmentOffset()
		moreFragments = ipv4.Flags()&header.IPv4FlagMoreFragments == header.IPv4FlagMoreFragments
		src = ipv4.SourceAddress()
		dst = ipv4.DestinationAddress()
		transProto = ipv4.Protocol()
		size = ipv4.TotalLength() - uint16(ipv4.HeaderLength())
		id = uint32(ipv4.ID())

	case header.IPv6ProtocolNumber:
		proto, fragID, fragOffset, fragMore, ok := parse.IPv6(clone)
		if !ok {
			return
		}

		ipv6 := header.IPv6(clone.NetworkHeader().Slice())
		src = ipv6.SourceAddress()
		dst = ipv6.DestinationAddress()
		transProto = uint8(proto)
		size = ipv6.PayloadLength()
		id = fragID
		moreFragments = fragMore
		fragmentOffset = fragOffset

	case header.ARPProtocolNumber:
		if !parse.ARP(clone) {
			return
		}

		arp := header.ARP(clone.NetworkHeader().Slice())
		log.Infof(
			"%s%s arp %s (%s) -> %s (%s) valid:%t",
			prefix,
			directionPrefix,
			tcpip.AddrFromSlice(arp.ProtocolAddressSender()), tcpip.LinkAddress(arp.HardwareAddressSender()),
			tcpip.AddrFromSlice(arp.ProtocolAddressTarget()), tcpip.LinkAddress(arp.HardwareAddressTarget()),
			arp.IsValid(),
		)
		return
	default:
		log.Infof("%s%s unknown network protocol: %d", prefix, directionPrefix, protocol)
		return
	}

	// Figure out the transport layer info.
	transName := "unknown"
	srcPort := uint16(0)
	dstPort := uint16(0)
	details := ""
	switch tcpip.TransportProtocolNumber(transProto) {
	case header.ICMPv4ProtocolNumber:
		transName = "icmp"
		hdr, ok := clone.Data().PullUp(header.ICMPv4MinimumSize)
		if !ok {
			break
		}
		icmp := header.ICMPv4(hdr)
		icmpType := "unknown"
		if fragmentOffset == 0 {
			switch icmp.Type() {
			case header.ICMPv4EchoReply:
				icmpType = "echo reply"
			case header.ICMPv4DstUnreachable:
				icmpType = "destination unreachable"
			case header.ICMPv4SrcQuench:
				icmpType = "source quench"
			case header.ICMPv4Redirect:
				icmpType = "redirect"
			case header.ICMPv4Echo:
				icmpType = "echo"
			case header.ICMPv4TimeExceeded:
				icmpType = "time exceeded"
			case header.ICMPv4ParamProblem:
				icmpType = "param problem"
			case header.ICMPv4Timestamp:
				icmpType = "timestamp"
			case header.ICMPv4TimestampReply:
				icmpType = "timestamp reply"
			case header.ICMPv4InfoRequest:
				icmpType = "info request"
			case header.ICMPv4InfoReply:
				icmpType = "info reply"
			}
		}
		log.Infof("%s%s %s %s -> %s %s len:%d id:%04x code:%d", prefix, directionPrefix, transName, src, dst, icmpType, size, id, icmp.Code())
		return

	case header.ICMPv6ProtocolNumber:
		transName = "icmp"
		hdr, ok := clone.Data().PullUp(header.ICMPv6MinimumSize)
		if !ok {
			break
		}
		icmp := header.ICMPv6(hdr)
		icmpType := "unknown"
		switch icmp.Type() {
		case header.ICMPv6DstUnreachable:
			icmpType = "destination unreachable"
		case header.ICMPv6PacketTooBig:
			icmpType = "packet too big"
		case header.ICMPv6TimeExceeded:
			icmpType = "time exceeded"
		case header.ICMPv6ParamProblem:
			icmpType = "param problem"
		case header.ICMPv6EchoRequest:
			icmpType = "echo request"
		case header.ICMPv6EchoReply:
			icmpType = "echo reply"
		case header.ICMPv6RouterSolicit:
			icmpType = "router solicit"
		case header.ICMPv6RouterAdvert:
			icmpType = "router advert"
		case header.ICMPv6NeighborSolicit:
			icmpType = "neighbor solicit"
		case header.ICMPv6NeighborAdvert:
			icmpType = "neighbor advert"
		case header.ICMPv6RedirectMsg:
			icmpType = "redirect message"
		}
		log.Infof("%s%s %s %s -> %s %s len:%d id:%04x code:%d", prefix, directionPrefix, transName, src, dst, icmpType, size, id, icmp.Code())
		return

	case header.UDPProtocolNumber:
		transName = "udp"
		if ok := parse.UDP(clone); !ok {
			break
		}

		udp := header.UDP(clone.TransportHeader().Slice())
		if fragmentOffset == 0 {
			srcPort = udp.SourcePort()
			dstPort = udp.DestinationPort()
			details = fmt.Sprintf("xsum: 0x%x", udp.Checksum())
			size -= header.UDPMinimumSize
		}

	case header.TCPProtocolNumber:
		transName = "tcp"
		if ok := parse.TCP(clone); !ok {
			break
		}

		tcp := header.TCP(clone.TransportHeader().Slice())
		if fragmentOffset == 0 {
			offset := int(tcp.DataOffset())
			if offset < header.TCPMinimumSize {
				details += fmt.Sprintf("invalid packet: tcp data offset too small %d", offset)
				break
			}
			if size := clone.Data().Size() + len(tcp); offset > size && !moreFragments {
				details += fmt.Sprintf("invalid packet: tcp data offset %d larger than tcp packet length %d", offset, size)
				break
			}

			srcPort = tcp.SourcePort()
			dstPort = tcp.DestinationPort()
			size -= uint16(offset)

			// Initialize the TCP flags.
			flags := tcp.Flags()
			details = fmt.Sprintf("flags: %s seqnum: %d ack: %d win: %d xsum:0x%x", flags, tcp.SequenceNumber(), tcp.AckNumber(), tcp.WindowSize(), tcp.Checksum())
			if flags&header.TCPFlagSyn != 0 {
				details += fmt.Sprintf(" options: %+v", header.ParseSynOptions(tcp.Options(), flags&header.TCPFlagAck != 0))
			} else {
				details += fmt.Sprintf(" options: %+v", tcp.ParsedOptions())
			}
		}

	default:
		log.Infof("%s%s %s -> %s unknown transport protocol: %d", prefix, directionPrefix, src, dst, transProto)
		return
	}

	if pkt.GSOOptions.Type != stack.GSONone {
		details += fmt.Sprintf(" gso: %#v", pkt.GSOOptions)
	}

	log.Infof("%s%s %s %s:%d -> %s:%d len:%d id:%04x %s", prefix, directionPrefix, transName, src, srcPort, dst, dstPort, size, id, details)
}

// trimmedClone clones the packet buffer to not modify the original. It trims
// anything before the network header.
func trimmedClone(pkt *stack.PacketBuffer) *stack.PacketBuffer {
	// We don't clone the original packet buffer so that the new packet buffer
	// does not have any of its headers set.
	//
	// We trim the link headers from the cloned buffer as the sniffer doesn't
	// handle link headers.
	buf := pkt.ToBuffer()
	buf.TrimFront(int64(len(pkt.VirtioNetHeader().Slice())))
	buf.TrimFront(int64(len(pkt.LinkHeader().Slice())))
	return stack.NewPacketBuffer(stack.PacketBufferOptions{Payload: buf})
}