github.com/project-88388/tendermint-v0.34.14-terra.2@v1.0.0/p2p/pex/pex_reactor.go

package pex

import (
	"errors"
	"fmt"
	"sync"
	"time"

	"github.com/gogo/protobuf/proto"

	"github.com/tendermint/tendermint/libs/cmap"
	tmmath "github.com/tendermint/tendermint/libs/math"
	tmrand "github.com/tendermint/tendermint/libs/rand"
	"github.com/tendermint/tendermint/libs/service"
	"github.com/tendermint/tendermint/p2p"
	"github.com/tendermint/tendermint/p2p/conn"
	tmp2p "github.com/tendermint/tendermint/proto/tendermint/p2p"
)

type Peer = p2p.Peer

const (
	// PexChannel is a channel for PEX messages
	PexChannel = byte(0x00)

	// over-estimate of max NetAddress size
	// hexID (40) + IP (16) + Port (2) + Name (100) ...
	// NOTE: dont use massive DNS name ..
	maxAddressSize = 256

	// NOTE: amplificaiton factor!
	// small request results in up to maxMsgSize response
	maxMsgSize = maxAddressSize * maxGetSelection

	// ensure we have enough peers
	defaultEnsurePeersPeriod = 30 * time.Second

	// Seed/Crawler constants

	// minTimeBetweenCrawls is a minimum time between attempts to crawl a peer.
	minTimeBetweenCrawls = 2 * time.Minute

	// check some peers every this
	crawlPeerPeriod = 30 * time.Second

	maxAttemptsToDial = 16 // ~ 35h in total (last attempt - 18h)

	// if node connects to seed, it does not have any trusted peers.
	// Especially in the beginning, node should have more trusted peers than
	// untrusted.
	biasToSelectNewPeers = 30 // 70 to select good peers

	// if a peer is marked bad, it will be banned for at least this time period
	defaultBanTime = 24 * time.Hour
)

type errMaxAttemptsToDial struct {
}

func (e errMaxAttemptsToDial) Error() string {
	return fmt.Sprintf("reached max attempts %d to dial", maxAttemptsToDial)
}

type errTooEarlyToDial struct {
	backoffDuration time.Duration
	lastDialed      time.Time
}

func (e errTooEarlyToDial) Error() string {
	return fmt.Sprintf(
		"too early to dial (backoff duration: %d, last dialed: %v, time since: %v)",
		e.backoffDuration, e.lastDialed, time.Since(e.lastDialed))
}

// Reactor handles PEX (peer exchange) and ensures that an
// adequate number of peers are connected to the switch.
//
// It uses `AddrBook` (address book) to store `NetAddress`es of the peers.
//
// ## Preventing abuse
//
// Only accept pexAddrsMsg from peers we sent a corresponding pexRequestMsg too.
// Only accept one pexRequestMsg every ~defaultEnsurePeersPeriod.
type Reactor struct {
	p2p.BaseReactor

	book              AddrBook
	config            *ReactorConfig
	ensurePeersPeriod time.Duration // TODO: should go in the config

	// maps to prevent abuse
	requestsSent         *cmap.CMap // ID->struct{}: unanswered send requests
	lastReceivedRequests *cmap.CMap // ID->time.Time: last time peer requested from us

	seedAddrs []*p2p.NetAddress

	attemptsToDial sync.Map // address (string) -> {number of attempts (int), last time dialed (time.Time)}

	// seed/crawled mode fields
	crawlPeerInfos map[p2p.ID]crawlPeerInfo
}

func (r *Reactor) minReceiveRequestInterval() time.Duration {
	// NOTE: must be less than ensurePeersPeriod, otherwise we'll request
	// peers too quickly from others and they'll think we're bad!
	return r.ensurePeersPeriod / 3
}

// ReactorConfig holds reactor specific configuration data.
type ReactorConfig struct {
	// Seed/Crawler mode
	SeedMode bool

	// We want seeds to only advertise good peers. Therefore they should wait at
	// least as long as we expect it to take for a peer to become good before
	// disconnecting.
	SeedDisconnectWaitPeriod time.Duration

	// Maximum pause when redialing a persistent peer (if zero, exponential backoff is used)
	PersistentPeersMaxDialPeriod time.Duration

	// Seeds is a list of addresses reactor may use
	// if it can't connect to peers in the addrbook.
	Seeds []string
}

type _attemptsToDial struct {
	number     int
	lastDialed time.Time
}

// NewReactor creates new PEX reactor.
func NewReactor(b AddrBook, config *ReactorConfig) *Reactor {
	r := &Reactor{
		book:                 b,
		config:               config,
		ensurePeersPeriod:    defaultEnsurePeersPeriod,
		requestsSent:         cmap.NewCMap(),
		lastReceivedRequests: cmap.NewCMap(),
		crawlPeerInfos:       make(map[p2p.ID]crawlPeerInfo),
	}
	r.BaseReactor = *p2p.NewBaseReactor("PEX", r)
	return r
}

// OnStart implements BaseService
func (r *Reactor) OnStart() error {
	err := r.book.Start()
	if err != nil && err != service.ErrAlreadyStarted {
		return err
	}

	numOnline, seedAddrs, err := r.checkSeeds()
	if err != nil {
		return err
	} else if numOnline == 0 && r.book.Empty() {
		return errors.New("address book is empty and couldn't resolve any seed nodes")
	}

	r.seedAddrs = seedAddrs

	// Check if this node should run
	// in seed/crawler mode
	if r.config.SeedMode {
		go r.crawlPeersRoutine()
	} else {
		go r.ensurePeersRoutine()
	}
	return nil
}

// OnStop implements BaseService
func (r *Reactor) OnStop() {
	if err := r.book.Stop(); err != nil {
		r.Logger.Error("Error stopping address book", "err", err)
	}
}

// GetChannels implements Reactor
func (r *Reactor) GetChannels() []*conn.ChannelDescriptor {
	return []*conn.ChannelDescriptor{
		{
			ID:                  PexChannel,
			Priority:            1,
			SendQueueCapacity:   10,
			RecvMessageCapacity: maxMsgSize,
		},
	}
}

// AddPeer implements Reactor by adding peer to the address book (if inbound)
// or by requesting more addresses (if outbound).
func (r *Reactor) AddPeer(p Peer) {
	if p.IsOutbound() {
		// For outbound peers, the address is already in the books -
		// either via DialPeersAsync or r.Receive.
		// Ask it for more peers if we need.
		if r.book.NeedMoreAddrs() {
			r.RequestAddrs(p)
		}
	} else {
		// inbound peer is its own source
		addr, err := p.NodeInfo().NetAddress()
		if err != nil {
			r.Logger.Error("Failed to get peer NetAddress", "err", err, "peer", p)
			return
		}

		// Make it explicit that addr and src are the same for an inbound peer.
		src := addr

		// add to book. dont RequestAddrs right away because
		// we don't trust inbound as much - let ensurePeersRoutine handle it.
		err = r.book.AddAddress(addr, src)
		r.logErrAddrBook(err)
	}
}

// RemovePeer implements Reactor by resetting peer's requests info.
func (r *Reactor) RemovePeer(p Peer, reason interface{}) {
	id := string(p.ID())
	r.requestsSent.Delete(id)
	r.lastReceivedRequests.Delete(id)
}

func (r *Reactor) logErrAddrBook(err error) {
	if err != nil {
		switch err.(type) {
		case ErrAddrBookNilAddr:
			r.Logger.Error("Failed to add new address", "err", err)
		default:
			// non-routable, self, full book, private, etc.
			r.Logger.Debug("Failed to add new address", "err", err)
		}
	}
}

// Receive implements Reactor by handling incoming PEX messages.
func (r *Reactor) Receive(chID byte, src Peer, msgBytes []byte) {
	msg, err := decodeMsg(msgBytes)
	if err != nil {
		r.Logger.Error("Error decoding message", "src", src, "chId", chID, "err", err)
		r.Switch.StopPeerForError(src, err)
		return
	}
	r.Logger.Debug("Received message", "src", src, "chId", chID, "msg", msg)

	switch msg := msg.(type) {
	case *tmp2p.PexRequest:

		// NOTE: this is a prime candidate for amplification attacks,
		// so it's important we
		// 1) restrict how frequently peers can request
		// 2) limit the output size

		// If we're a seed and this is an inbound peer,
		// respond once and disconnect.
		if r.config.SeedMode && !src.IsOutbound() {
			id := string(src.ID())
			v := r.lastReceivedRequests.Get(id)
			if v != nil {
				// FlushStop/StopPeer are already
				// running in a go-routine.
				return
			}
			r.lastReceivedRequests.Set(id, time.Now())

			// Send addrs and disconnect
			r.SendAddrs(src, r.book.GetSelectionWithBias(biasToSelectNewPeers))
			go func() {
				// In a go-routine so it doesn't block .Receive.
				src.FlushStop()
				r.Switch.StopPeerGracefully(src)
			}()

		} else {
			// Check we're not receiving requests too frequently.
			if err := r.receiveRequest(src); err != nil {
				r.Switch.StopPeerForError(src, err)
				r.book.MarkBad(src.SocketAddr(), defaultBanTime)
				return
			}
			r.SendAddrs(src, r.book.GetSelection())
		}

	case *tmp2p.PexAddrs:
		// If we asked for addresses, add them to the book
		addrs, err := p2p.NetAddressesFromProto(msg.Addrs)
		if err != nil {
			r.Switch.StopPeerForError(src, err)
			r.book.MarkBad(src.SocketAddr(), defaultBanTime)
			return
		}
		err = r.ReceiveAddrs(addrs, src)
		if err != nil {
			r.Switch.StopPeerForError(src, err)
			if err == ErrUnsolicitedList {
				r.book.MarkBad(src.SocketAddr(), defaultBanTime)
			}
			return
		}

	default:
		r.Logger.Error(fmt.Sprintf("Unknown message type %T", msg))
	}
}

// enforces a minimum amount of time between requests
func (r *Reactor) receiveRequest(src Peer) error {
	id := string(src.ID())
	v := r.lastReceivedRequests.Get(id)
	if v == nil {
		// initialize with empty time
		lastReceived := time.Time{}
		r.lastReceivedRequests.Set(id, lastReceived)
		return nil
	}

	lastReceived := v.(time.Time)
	if lastReceived.Equal(time.Time{}) {
		// first time gets a free pass. then we start tracking the time
		lastReceived = time.Now()
		r.lastReceivedRequests.Set(id, lastReceived)
		return nil
	}

	now := time.Now()
	minInterval := r.minReceiveRequestInterval()
	if now.Sub(lastReceived) < minInterval {
		return fmt.Errorf(
			"peer (%v) sent next PEX request too soon. lastReceived: %v, now: %v, minInterval: %v. Disconnecting",
			src.ID(),
			lastReceived,
			now,
			minInterval,
		)
	}
	r.lastReceivedRequests.Set(id, now)
	return nil
}

// RequestAddrs asks peer for more addresses if we do not already have a
// request out for this peer.
func (r *Reactor) RequestAddrs(p Peer) {
	id := string(p.ID())
	if r.requestsSent.Has(id) {
		return
	}
	r.Logger.Debug("Request addrs", "from", p)
	r.requestsSent.Set(id, struct{}{})
	p.Send(PexChannel, mustEncode(&tmp2p.PexRequest{}))
}

// ReceiveAddrs adds the given addrs to the addrbook if theres an open
// request for this peer and deletes the open request.
// If there's no open request for the src peer, it returns an error.
func (r *Reactor) ReceiveAddrs(addrs []*p2p.NetAddress, src Peer) error {
	id := string(src.ID())
	if !r.requestsSent.Has(id) {
		return ErrUnsolicitedList
	}
	r.requestsSent.Delete(id)

	srcAddr, err := src.NodeInfo().NetAddress()
	if err != nil {
		return err
	}

	srcIsSeed := false
	for _, seedAddr := range r.seedAddrs {
		if seedAddr.Equals(srcAddr) {
			srcIsSeed = true
			break
		}
	}

	for _, netAddr := range addrs {
		// NOTE: we check netAddr validity and routability in book#AddAddress.
		err = r.book.AddAddress(netAddr, srcAddr)
		if err != nil {
			r.logErrAddrBook(err)
			// XXX: should we be strict about incoming data and disconnect from a
			// peer here too?
			continue
		}

		// If this address came from a seed node, try to connect to it without
		// waiting (#2093)
		if srcIsSeed {
			r.Logger.Info("Will dial address, which came from seed", "addr", netAddr, "seed", srcAddr)
			go func(addr *p2p.NetAddress) {
				err := r.dialPeer(addr)
				if err != nil {
					switch err.(type) {
					case errMaxAttemptsToDial, errTooEarlyToDial, p2p.ErrCurrentlyDialingOrExistingAddress:
						r.Logger.Debug(err.Error(), "addr", addr)
					default:
						r.Logger.Error(err.Error(), "addr", addr)
					}
				}
			}(netAddr)
		}
	}

	return nil
}

// SendAddrs sends addrs to the peer.
func (r *Reactor) SendAddrs(p Peer, netAddrs []*p2p.NetAddress) {
	p.Send(PexChannel, mustEncode(&tmp2p.PexAddrs{Addrs: p2p.NetAddressesToProto(netAddrs)}))
}

// SetEnsurePeersPeriod sets period to ensure peers connected.
func (r *Reactor) SetEnsurePeersPeriod(d time.Duration) {
	r.ensurePeersPeriod = d
}

// Ensures that sufficient peers are connected. (continuous)
func (r *Reactor) ensurePeersRoutine() {
	var (
		seed   = tmrand.NewRand()
		jitter = seed.Int63n(r.ensurePeersPeriod.Nanoseconds())
	)

	// Randomize first round of communication to avoid thundering herd.
	// If no peers are present directly start connecting so we guarantee swift
	// setup with the help of configured seeds.
	if r.nodeHasSomePeersOrDialingAny() {
		time.Sleep(time.Duration(jitter))
	}

	// fire once immediately.
	// ensures we dial the seeds right away if the book is empty
	r.ensurePeers()

	// fire periodically
	ticker := time.NewTicker(r.ensurePeersPeriod)
	for {
		select {
		case <-ticker.C:
			r.ensurePeers()
		case <-r.Quit():
			ticker.Stop()
			return
		}
	}
}

// ensurePeers ensures that sufficient peers are connected. (once)
//
// heuristic that we haven't perfected yet, or, perhaps is manually edited by
// the node operator. It should not be used to compute what addresses are
// already connected or not.
func (r *Reactor) ensurePeers() {
	var (
		out, in, dial = r.Switch.NumPeers()
		numToDial     = r.Switch.MaxNumOutboundPeers() - (out + dial)
	)
	r.Logger.Info(
		"Ensure peers",
		"numOutPeers", out,
		"numInPeers", in,
		"numDialing", dial,
		"numToDial", numToDial,
	)

	if numToDial <= 0 {
		return
	}

	// bias to prefer more vetted peers when we have fewer connections.
	// not perfect, but somewhate ensures that we prioritize connecting to more-vetted
	// NOTE: range here is [10, 90]. Too high ?
	newBias := tmmath.MinInt(out, 8)*10 + 10

	toDial := make(map[p2p.ID]*p2p.NetAddress)
	// Try maxAttempts times to pick numToDial addresses to dial
	maxAttempts := numToDial * 3

	for i := 0; i < maxAttempts && len(toDial) < numToDial; i++ {
		try := r.book.PickAddress(newBias)
		if try == nil {
			continue
		}
		if _, selected := toDial[try.ID]; selected {
			continue
		}
		if r.Switch.IsDialingOrExistingAddress(try) {
			continue
		}
		// TODO: consider moving some checks from toDial into here
		// so we don't even consider dialing peers that we want to wait
		// before dialling again, or have dialed too many times already
		r.Logger.Info("Will dial address", "addr", try)
		toDial[try.ID] = try
	}

	// Dial picked addresses
	for _, addr := range toDial {
		go func(addr *p2p.NetAddress) {
			err := r.dialPeer(addr)
			if err != nil {
				switch err.(type) {
				case errMaxAttemptsToDial, errTooEarlyToDial:
					r.Logger.Debug(err.Error(), "addr", addr)
				default:
					r.Logger.Error(err.Error(), "addr", addr)
				}
			}
		}(addr)
	}

	if r.book.NeedMoreAddrs() {
		// Check if banned nodes can be reinstated
		r.book.ReinstateBadPeers()
	}

	if r.book.NeedMoreAddrs() {

		// 1) Pick a random peer and ask for more.
		peers := r.Switch.Peers().List()
		peersCount := len(peers)
		if peersCount > 0 {
			peer := peers[tmrand.Int()%peersCount]
			r.Logger.Info("We need more addresses. Sending pexRequest to random peer", "peer", peer)
			r.RequestAddrs(peer)
		}

		// 2) Dial seeds if we are not dialing anyone.
		// This is done in addition to asking a peer for addresses to work-around
		// peers not participating in PEX.
		if len(toDial) == 0 {
			r.Logger.Info("No addresses to dial. Falling back to seeds")
			r.dialSeeds()
		}
	}
}

func (r *Reactor) dialAttemptsInfo(addr *p2p.NetAddress) (attempts int, lastDialed time.Time) {
	_attempts, ok := r.attemptsToDial.Load(addr.DialString())
	if !ok {
		return
	}
	atd := _attempts.(_attemptsToDial)
	return atd.number, atd.lastDialed
}

func (r *Reactor) dialPeer(addr *p2p.NetAddress) error {
	attempts, lastDialed := r.dialAttemptsInfo(addr)
	if !r.Switch.IsPeerPersistent(addr) && attempts > maxAttemptsToDial {
		r.book.MarkBad(addr, defaultBanTime)
		return errMaxAttemptsToDial{}
	}

	// exponential backoff if it's not our first attempt to dial given address
	if attempts > 0 {
		jitter := time.Duration(tmrand.Float64() * float64(time.Second)) // 1s == (1e9 ns)
		backoffDuration := jitter + ((1 << uint(attempts)) * time.Second)
		backoffDuration = r.maxBackoffDurationForPeer(addr, backoffDuration)
		sinceLastDialed := time.Since(lastDialed)
		if sinceLastDialed < backoffDuration {
			return errTooEarlyToDial{backoffDuration, lastDialed}
		}
	}

	err := r.Switch.DialPeerWithAddress(addr)
	if err != nil {
		if _, ok := err.(p2p.ErrCurrentlyDialingOrExistingAddress); ok {
			return err
		}

		markAddrInBookBasedOnErr(addr, r.book, err)
		switch err.(type) {
		case p2p.ErrSwitchAuthenticationFailure:
			// NOTE: addr is removed from addrbook in markAddrInBookBasedOnErr
			r.attemptsToDial.Delete(addr.DialString())
		default:
			r.attemptsToDial.Store(addr.DialString(), _attemptsToDial{attempts + 1, time.Now()})
		}
		return fmt.Errorf("dialing failed (attempts: %d): %w", attempts+1, err)
	}

	// cleanup any history
	r.attemptsToDial.Delete(addr.DialString())
	return nil
}

// maxBackoffDurationForPeer caps the backoff duration for persistent peers.
func (r *Reactor) maxBackoffDurationForPeer(addr *p2p.NetAddress, planned time.Duration) time.Duration {
	if r.config.PersistentPeersMaxDialPeriod > 0 &&
		planned > r.config.PersistentPeersMaxDialPeriod &&
		r.Switch.IsPeerPersistent(addr) {
		return r.config.PersistentPeersMaxDialPeriod
	}
	return planned
}

// checkSeeds checks that addresses are well formed.
// Returns number of seeds we can connect to, along with all seeds addrs.
// return err if user provided any badly formatted seed addresses.
// Doesn't error if the seed node can't be reached.
// numOnline returns -1 if no seed nodes were in the initial configuration.
func (r *Reactor) checkSeeds() (numOnline int, netAddrs []*p2p.NetAddress, err error) {
	lSeeds := len(r.config.Seeds)
	if lSeeds == 0 {
		return -1, nil, nil
	}
	netAddrs, errs := p2p.NewNetAddressStrings(r.config.Seeds)
	numOnline = lSeeds - len(errs)
	for _, err := range errs {
		switch e := err.(type) {
		case p2p.ErrNetAddressLookup:
			r.Logger.Error("Connecting to seed failed", "err", e)
		default:
			return 0, nil, fmt.Errorf("seed node configuration has error: %w", e)
		}
	}
	return numOnline, netAddrs, nil
}

// randomly dial seeds until we connect to one or exhaust them
func (r *Reactor) dialSeeds() {
	perm := tmrand.Perm(len(r.seedAddrs))
	// perm := r.Switch.rng.Perm(lSeeds)
	for _, i := range perm {
		// dial a random seed
		seedAddr := r.seedAddrs[i]
		err := r.Switch.DialPeerWithAddress(seedAddr)

		switch err.(type) {
		case nil, p2p.ErrCurrentlyDialingOrExistingAddress:
			return
		}
		r.Switch.Logger.Error("Error dialing seed", "err", err, "seed", seedAddr)
	}
	// do not write error message if there were no seeds specified in config
	if len(r.seedAddrs) > 0 {
		r.Switch.Logger.Error("Couldn't connect to any seeds")
	}
}

// AttemptsToDial returns the number of attempts to dial specific address. It
// returns 0 if never attempted or successfully connected.
func (r *Reactor) AttemptsToDial(addr *p2p.NetAddress) int {
	lAttempts, attempted := r.attemptsToDial.Load(addr.DialString())
	if attempted {
		return lAttempts.(_attemptsToDial).number
	}
	return 0
}

//----------------------------------------------------------

// Explores the network searching for more peers. (continuous)
// Seed/Crawler Mode causes this node to quickly disconnect
// from peers, except other seed nodes.
func (r *Reactor) crawlPeersRoutine() {
	// If we have any seed nodes, consult them first
	if len(r.seedAddrs) > 0 {
		r.dialSeeds()
	} else {
		// Do an initial crawl
		r.crawlPeers(r.book.GetSelection())
	}

	// Fire periodically
	ticker := time.NewTicker(crawlPeerPeriod)

	for {
		select {
		case <-ticker.C:
			r.attemptDisconnects()
			r.crawlPeers(r.book.GetSelection())
			r.cleanupCrawlPeerInfos()
		case <-r.Quit():
			return
		}
	}
}

// nodeHasSomePeersOrDialingAny returns true if the node is connected to some
// peers or dialing them currently.
func (r *Reactor) nodeHasSomePeersOrDialingAny() bool {
	out, in, dial := r.Switch.NumPeers()
	return out+in+dial > 0
}

// crawlPeerInfo handles temporary data needed for the network crawling
// performed during seed/crawler mode.
type crawlPeerInfo struct {
	Addr *p2p.NetAddress `json:"addr"`
	// The last time we crawled the peer or attempted to do so.
	LastCrawled time.Time `json:"last_crawled"`
}

// crawlPeers will crawl the network looking for new peer addresses.
func (r *Reactor) crawlPeers(addrs []*p2p.NetAddress) {
	now := time.Now()

	for _, addr := range addrs {
		peerInfo, ok := r.crawlPeerInfos[addr.ID]

		// Do not attempt to connect with peers we recently crawled.
		if ok && now.Sub(peerInfo.LastCrawled) < minTimeBetweenCrawls {
			continue
		}

		// Record crawling attempt.
		r.crawlPeerInfos[addr.ID] = crawlPeerInfo{
			Addr:        addr,
			LastCrawled: now,
		}

		err := r.dialPeer(addr)
		if err != nil {
			switch err.(type) {
			case errMaxAttemptsToDial, errTooEarlyToDial, p2p.ErrCurrentlyDialingOrExistingAddress:
				r.Logger.Debug(err.Error(), "addr", addr)
			default:
				r.Logger.Error(err.Error(), "addr", addr)
			}
			continue
		}

		peer := r.Switch.Peers().Get(addr.ID)
		if peer != nil {
			r.RequestAddrs(peer)
		}
	}
}

func (r *Reactor) cleanupCrawlPeerInfos() {
	for id, info := range r.crawlPeerInfos {
		// If we did not crawl a peer for 24 hours, it means the peer was removed
		// from the addrbook => remove
		//
		// 10000 addresses / maxGetSelection = 40 cycles to get all addresses in
		// the ideal case,
		// 40 * crawlPeerPeriod ~ 20 minutes
		if time.Since(info.LastCrawled) > 24*time.Hour {
			delete(r.crawlPeerInfos, id)
		}
	}
}

// attemptDisconnects checks if we've been with each peer long enough to disconnect
func (r *Reactor) attemptDisconnects() {
	for _, peer := range r.Switch.Peers().List() {
		if peer.Status().Duration < r.config.SeedDisconnectWaitPeriod {
			continue
		}
		if peer.IsPersistent() {
			continue
		}
		r.Switch.StopPeerGracefully(peer)
	}
}

func markAddrInBookBasedOnErr(addr *p2p.NetAddress, book AddrBook, err error) {
	// TODO: detect more "bad peer" scenarios
	switch err.(type) {
	case p2p.ErrSwitchAuthenticationFailure:
		book.MarkBad(addr, defaultBanTime)
	default:
		book.MarkAttempt(addr)
	}
}

//-----------------------------------------------------------------------------
// Messages

// mustEncode proto encodes a tmp2p.Message
func mustEncode(pb proto.Message) []byte {
	msg := tmp2p.Message{}
	switch pb := pb.(type) {
	case *tmp2p.PexRequest:
		msg.Sum = &tmp2p.Message_PexRequest{PexRequest: pb}
	case *tmp2p.PexAddrs:
		msg.Sum = &tmp2p.Message_PexAddrs{PexAddrs: pb}
	default:
		panic(fmt.Sprintf("Unknown message type %T", pb))
	}

	bz, err := msg.Marshal()
	if err != nil {
		panic(fmt.Errorf("unable to marshal %T: %w", pb, err))
	}
	return bz
}

func decodeMsg(bz []byte) (proto.Message, error) {
	pb := &tmp2p.Message{}

	err := pb.Unmarshal(bz)
	if err != nil {
		return nil, err
	}

	switch msg := pb.Sum.(type) {
	case *tmp2p.Message_PexRequest:
		return msg.PexRequest, nil
	case *tmp2p.Message_PexAddrs:
		return msg.PexAddrs, nil
	default:
		return nil, fmt.Errorf("unknown message: %T", msg)
	}
}