github.com/v2fly/v2ray-core/v5@v5.16.2-0.20240507031116-8191faa6e095/release/config/config.json (about)

     1  // Config file of V2Ray. This file follows standard JSON format, with comments support.
     2  // Uncomment entries below to satisfy your needs. Also read our manual for more detail at
     3  // https://www.v2fly.org/
     4  {
     5    "log": {
     6      // By default, V2Ray writes access log to stdout.
     7      // "access": "/path/to/access/log/file",
     8  
     9      // By default, V2Ray write error log to stdout.
    10      // "error": "/path/to/error/log/file",
    11  
    12      // Log level, one of "debug", "info", "warning", "error", "none"
    13      "loglevel": "warning"
    14    },
    15    // List of inbound proxy configurations.
    16    "inbounds": [{
    17      // Port to listen on. You may need root access if the value is less than 1024.
    18      "port": 1080,
    19  
    20      // IP address to listen on. Change to "0.0.0.0" to listen on all network interfaces.
    21      "listen": "127.0.0.1",
    22  
    23      // Tag of the inbound proxy. May be used for routing.
    24      "tag": "socks-inbound",
    25  
    26      // Protocol name of inbound proxy.
    27      "protocol": "socks",
    28  
    29      // Settings of the protocol. Varies based on protocol.
    30      "settings": {
    31        "auth": "noauth",
    32        "udp": false,
    33        "ip": "127.0.0.1"
    34      },
    35  
    36      // Enable sniffing on TCP connection.
    37      "sniffing": {
    38        "enabled": true,
    39        // Target domain will be overriden to the one carried by the connection, if the connection is HTTP or HTTPS.
    40        "destOverride": ["http", "tls"]
    41      }
    42    }],
    43    // List of outbound proxy configurations.
    44    "outbounds": [{
    45      // Protocol name of the outbound proxy.
    46      "protocol": "freedom",
    47  
    48      // Settings of the protocol. Varies based on protocol.
    49      "settings": {},
    50  
    51      // Tag of the outbound. May be used for routing.
    52      "tag": "direct"
    53    },{
    54      "protocol": "blackhole",
    55      "settings": {},
    56      "tag": "blocked"
    57    }],
    58  
    59    // Transport is for global transport settings. If you have multiple transports with same settings
    60    // (say mKCP), you may put it here, instead of in each individual inbound/outbounds.
    61    //"transport": {},
    62  
    63    // Routing controls how traffic from inbounds are sent to outbounds.
    64    "routing": {
    65      "domainStrategy": "IPOnDemand",
    66      "rules":[
    67        {
    68          // Blocks access to private IPs. Remove this if you want to access your router.
    69          "type": "field",
    70          "ip": ["geoip:private"],
    71          "outboundTag": "blocked"
    72        },
    73        {
    74          // Blocks major ads.
    75          "type": "field",
    76          "domain": ["geosite:category-ads"],
    77          "outboundTag": "blocked"
    78        }
    79      ]
    80    },
    81  
    82    // Dns settings for domain resolution.
    83    "dns": {
    84      // Static hosts, similar to hosts file.
    85      "hosts": {
    86        // Match v2fly.org to another domain on CloudFlare. This domain will be used when querying IPs for v2fly.org.
    87        "domain:v2fly.org": "www.vicemc.net",
    88  
    89        // The following settings help to eliminate DNS poisoning in mainland China.
    90        // It is safe to comment these out if this is not the case for you.
    91        "domain:github.io": "pages.github.com",
    92        "domain:wikipedia.org": "www.wikimedia.org",
    93        "domain:shadowsocks.org": "electronicsrealm.com"
    94      },
    95      "servers": [
    96        "1.1.1.1",
    97        {
    98          "address": "114.114.114.114",
    99          "port": 53,
   100          // List of domains that use this DNS first.
   101          "domains": [
   102            "geosite:cn"
   103          ]
   104        },
   105        "8.8.8.8",
   106        "localhost"
   107      ]
   108    },
   109  
   110    // Policy controls some internal behavior of how V2Ray handles connections.
   111    // It may be on connection level by user levels in 'levels', or global settings in 'system.'
   112    "policy": {
   113      // Connection policys by user levels
   114      "levels": {
   115        "0": {
   116          "uplinkOnly": 0,
   117          "downlinkOnly": 0
   118        }
   119      },
   120      "system": {
   121        "statsInboundUplink": false,
   122        "statsInboundDownlink": false,
   123        "statsOutboundUplink": false,
   124        "statsOutboundDownlink": false
   125      }
   126    },
   127  
   128    // Stats enables internal stats counter.
   129    // This setting can be used together with Policy and Api. 
   130    //"stats":{},
   131  
   132    // Api enables gRPC APIs for external programs to communicate with V2Ray instance.
   133    //"api": {
   134      //"tag": "api",
   135      //"services": [
   136      //  "HandlerService",
   137      //  "LoggerService",
   138      //  "StatsService"
   139      //]
   140    //},
   141  
   142    // You may add other entries to the configuration, but they will not be recognized by V2Ray.
   143    "other": {}
   144  }