gitlab.com/CoiaPrant/sqlite3@v1.19.1/testdata/tcl/multiplex.test

# 2010 October 29
#
# The author disclaims copyright to this source code.  In place of
# a legal notice, here is a blessing:
#
#    May you do good and not evil.
#    May you find forgiveness for yourself and forgive others.
#    May you share freely, never taking more than you give.
#
#***********************************************************************
#

set testdir [file dirname $argv0]
source $testdir/tester.tcl
source $testdir/malloc_common.tcl

# The tests in this file assume that SQLite is compiled without
# ENABLE_8_3_NAMES.
#
ifcapable 8_3_names {
  puts -nonewline "SQLite compiled with SQLITE_ENABLE_8_3_NAMES. "
  puts            "Skipping tests multiplex-*."
  finish_test
  return
}

set g_chunk_size [ expr ($::SQLITE_MAX_PAGE_SIZE*16384) ]
set g_max_chunks 32

# This handles appending the chunk number
# to the end of the filename.  if 
# SQLITE_MULTIPLEX_EXT_OVWR is defined, then
# it overwrites the last 2 bytes of the 
# file name with the chunk number.
proc multiplex_name {name chunk} {
  if {$chunk==0} { return $name }
  set num [format "%03d" $chunk]
  ifcapable {multiplex_ext_overwrite} {
    set name [string range $name 0 [expr [string length $name]-2-1]]
  }
  return $name$num
}

# This saves off the parameters and calls the 
# underlying sqlite3_multiplex_control() API.
proc multiplex_set {db name chunk_size max_chunks} {
  global g_chunk_size
  global g_max_chunks
  set g_chunk_size [ expr (($chunk_size+($::SQLITE_MAX_PAGE_SIZE-1)) & ~($::SQLITE_MAX_PAGE_SIZE-1)) ]
  set g_max_chunks $max_chunks
  set rc [catch {sqlite3_multiplex_control $db $name chunk_size $chunk_size} msg]
  if { $rc==0 } { 
    set rc [catch {sqlite3_multiplex_control $db $name max_chunks $max_chunks} msg]
  }
  list $msg
}

# This attempts to delete the base file and 
# and files with the chunk extension.
proc multiplex_delete {name} {
  global g_max_chunks
  forcedelete $name
  for {set i 0} {$i<$g_max_chunks} {incr i} {
    forcedelete [multiplex_name $name $i]
    forcedelete [multiplex_name $name-journal $i]
    forcedelete [multiplex_name $name-wal $i]
  }
}

db close
sqlite3_shutdown
test_sqlite3_log xLog
proc xLog {error_code msg} {
  lappend ::log $error_code $msg 
}
unset -nocomplain log

multiplex_delete test.db
multiplex_delete test2.db

#-------------------------------------------------------------------------
#   multiplex-1.1.*: Test initialize and shutdown.

do_test multiplex-1.1 { sqlite3_multiplex_initialize nosuchvfs 1 } {SQLITE_ERROR}
do_test multiplex-1.2 { sqlite3_multiplex_initialize "" 1 }        {SQLITE_OK}
do_test multiplex-1.3 { sqlite3_multiplex_initialize "" 1 }        {SQLITE_MISUSE}
do_test multiplex-1.4 { sqlite3_multiplex_shutdown }               {SQLITE_OK}

do_test multiplex-1.5 { sqlite3_multiplex_initialize "" 0 }        {SQLITE_OK}
do_test multiplex-1.6 { sqlite3_multiplex_shutdown }               {SQLITE_OK}
do_test multiplex-1.7 { sqlite3_multiplex_initialize "" 1 }        {SQLITE_OK}
do_test multiplex-1.8 { sqlite3_multiplex_shutdown }               {SQLITE_OK}


do_test multiplex-1.9.1  { sqlite3_multiplex_initialize "" 1 }     {SQLITE_OK}
do_test multiplex-1.9.2  { sqlite3 db test.db }                    {}
do_test multiplex-1.9.3  { multiplex_set db main 32768 16 }        {SQLITE_OK}
do_test multiplex-1.9.4  { multiplex_set db main 32768 -1 }        {SQLITE_OK}
do_test multiplex-1.9.6  { multiplex_set db main 31 16 }           {SQLITE_OK}
do_test multiplex-1.9.7  { multiplex_set db main 32768 100 }       {SQLITE_OK}
do_test multiplex-1.9.8  { multiplex_set db main 1073741824 1 }    {SQLITE_OK}
do_test multiplex-1.9.9  { db close }                              {}
do_test multiplex-1.9.10 { sqlite3_multiplex_shutdown }            {SQLITE_OK}

do_test multiplex-1.10.1  { sqlite3_multiplex_initialize "" 1 }                                  {SQLITE_OK}
do_test multiplex-1.10.2  { sqlite3 db test.db }                                                 {}
do_test multiplex-1.10.3  { lindex [ catchsql { SELECT multiplex_control(2, 32768); } ] 0 }      {0}
do_test multiplex-1.10.4  { lindex [ catchsql { SELECT multiplex_control(3, -1); } ] 0 }         {0}
do_test multiplex-1.10.6  { lindex [ catchsql { SELECT multiplex_control(2, 31); } ] 0 }         {0}
do_test multiplex-1.10.7  { lindex [ catchsql { SELECT multiplex_control(3, 100); } ] 0 }        {0}
do_test multiplex-1.10.8  { lindex [ catchsql { SELECT multiplex_control(2, 1073741824); } ] 0 } {0}
do_test multiplex-1.10.9  { db close }                                                           {}
do_test multiplex-1.10.10 { sqlite3_multiplex_shutdown }                                         {SQLITE_OK}

do_test multiplex-1.11.1  { sqlite3_multiplex_initialize "" 1 }               {SQLITE_OK}
do_test multiplex-1.11.2  { sqlite3 db test.db }                              {}
do_test multiplex-1.11.3  { sqlite3_multiplex_control db main enable 0  }     {SQLITE_OK}
do_test multiplex-1.11.4  { sqlite3_multiplex_control db main enable 1  }     {SQLITE_OK}
do_test multiplex-1.11.5  { sqlite3_multiplex_control db main enable -1 }     {SQLITE_OK}
do_test multiplex-1.11.6  { db close }                                        {}
do_test multiplex-1.11.7  { sqlite3_multiplex_shutdown }                      {SQLITE_OK}

do_test multiplex-1.12.1  { sqlite3_multiplex_initialize "" 1 }                           {SQLITE_OK}
do_test multiplex-1.12.2  { sqlite3 db test.db }                                          {}
do_test multiplex-1.12.3  { lindex [ catchsql { SELECT multiplex_control(1, 0); } ] 0 }   {0}
do_test multiplex-1.12.4  { lindex [ catchsql { SELECT multiplex_control(1, 1); } ] 0 }   {0}
do_test multiplex-1.12.5  { lindex [ catchsql { SELECT multiplex_control(1, -1); } ] 0 }  {0}
do_test multiplex-1.12.6  { db close }                                                    {}
do_test multiplex-1.12.7  { sqlite3_multiplex_shutdown }                                  {SQLITE_OK}

do_test multiplex-1.13.1  { sqlite3_multiplex_initialize "" 1 }                           {SQLITE_OK}
do_test multiplex-1.13.2  { sqlite3 db test.db }                                          {}
do_test multiplex-1.13.3  { lindex [ catchsql { SELECT multiplex_control(-1, 0); } ] 0 }  {1}
do_test multiplex-1.13.4  { lindex [ catchsql { SELECT multiplex_control(4, 1); } ] 0 }   {1}
do_test multiplex-1.13.6  { db close }                                                    {}
do_test multiplex-1.13.7  { sqlite3_multiplex_shutdown }                                  {SQLITE_OK}

#-------------------------------------------------------------------------
# Some simple warm-body tests with a single database file in rollback 
# mode:
#
#   multiplex-2.1.*: Test simple writing to a multiplex file.
#
#   multiplex-2.2.*: More writing.
#
#   multiplex-2.3.*: Open and close a second db.
#
#   multiplex-2.4.*: Try to shutdown the multiplex system before closing the db
#                file. Check that this fails and the multiplex system still works
#                afterwards. Then close the database and successfully shut
#                down the multiplex system.
#
#   multiplex-2.5.*: More reading/writing.
#
#   multiplex-2.6.*: More reading/writing with varying small chunk sizes, as
#                well as varying journal mode.
#
#   multiplex-2.7.*: Disable/enable tests.
#

sqlite3_multiplex_initialize "" 1
multiplex_set db main 32768 16

forcedelete test.x
foreach f [glob -nocomplain {test.x*[0-9][0-9][0-9]}] {
  forcedelete $f
}
do_test multiplex-2.1.2 {
  sqlite3 db test.x
  execsql {
    PRAGMA page_size=1024;
    PRAGMA auto_vacuum=OFF;
    PRAGMA journal_mode=DELETE;
  }
  execsql {
    CREATE TABLE t1(a, b);
    INSERT INTO t1 VALUES(1, randomblob(1100));
    INSERT INTO t1 VALUES(2, randomblob(1100));
  }
} {}
do_test multiplex-2.1.3 { file size [multiplex_name test.x 0] } {4096}
do_test multiplex-2.1.4 {
  execsql { INSERT INTO t1 VALUES(3, randomblob(1100)) }
} {}
do_execsql_test multiplex-2.1.5 {
  PRAGMA multiplex_enabled;
  PRAGMA multiplex_filecount;
  PRAGMA multiplex_chunksize;
} {1 1 2147418112}

do_test multiplex-2.2.1 {
  execsql { INSERT INTO t1 VALUES(3, randomblob(1100)) }
} {}
do_test multiplex-2.2.3 { file size [multiplex_name test.x 0] } {6144}

do_test multiplex-2.3.1 {
  sqlite3 db2 test2.x
  db2 close
} {}


unset -nocomplain ::log
#do_test multiplex-2.4.1 {
#  sqlite3_multiplex_shutdown
#} {SQLITE_MISUSE}
do_test multiplex-2.4.2 {
  execsql { INSERT INTO t1 VALUES(3, randomblob(1100)) }
} {}
#do_test multiplex-2.4.3 {
#  set ::log
#} {SQLITE_MISUSE {sqlite3_multiplex_shutdown() called while database connections are still open}}

do_test multiplex-2.4.4 { file size [multiplex_name test.x 0] } {7168}
do_test multiplex-2.4.5 {
  db close
  sqlite3 db test.x
  db eval vacuum
  db close
  glob test.x*
} {test.x}
do_test multiplex-2.4.99 {
  sqlite3_multiplex_shutdown
} {SQLITE_OK}

do_test multiplex-2.5.1 {
  multiplex_delete test.x
  sqlite3_multiplex_initialize "" 1
  sqlite3 db test.x
  multiplex_set db main 4096 16
} {SQLITE_OK}

do_test multiplex-2.5.2 {
  execsql {
    PRAGMA page_size = 1024;
    PRAGMA journal_mode = delete;
    PRAGMA auto_vacuum = off;
    CREATE TABLE t1(a PRIMARY KEY, b);
  }
} {delete}

do_test multiplex-2.5.3 { 
  execsql { 
    INSERT INTO t1 VALUES(1, 'one');
    INSERT INTO t1 VALUES(2, randomblob(4000));
    INSERT INTO t1 VALUES(3, 'three');
    INSERT INTO t1 VALUES(4, randomblob(4000));
    INSERT INTO t1 VALUES(5, 'five');
    INSERT INTO t1 VALUES(6, randomblob($g_chunk_size));
    INSERT INTO t1 VALUES(7, randomblob($g_chunk_size));
  }
} {}

do_test multiplex-2.5.4 {
  db eval {SELECT * FROM t1 WHERE a=1}
} {1 one}

do_test multiplex-2.5.5 {
  db eval {SELECT * FROM t1 WHERE a=3}
} {3 three}

do_test multiplex-2.5.6 {
  db eval {SELECT * FROM t1 WHERE a=5}
} {5 five}

do_test multiplex-2.5.7 {
  db eval {SELECT a,length(b) FROM t1 WHERE a=2}
} {2 4000}

do_test multiplex-2.5.8 {
  db eval {SELECT a,length(b) FROM t1 WHERE a=4}
} {4 4000}

do_test multiplex-2.5.9 { file size [multiplex_name test.x 0] } [list $g_chunk_size]
do_test multiplex-2.5.10 { file size [multiplex_name test.x 1] } [list $g_chunk_size]
do_execsql_test multiplex-2.5.11 {
  PRAGMA multiplex_enabled;
  PRAGMA multiplex_filecount;
  PRAGMA multiplex_chunksize;
} {1 3 65536}
sqlite3 db test.x
do_execsql_test multiplex-2.5.12 {
  PRAGMA multiplex_filecount;
  PRAGMA multiplex_chunksize;
} {3 65536}



do_test multiplex-2.5.99 {
  db close
  sqlite3_multiplex_shutdown
} {SQLITE_OK}


set all_journal_modes {delete persist truncate memory off}
foreach jmode $all_journal_modes {
  for {set sz 151} {$sz<8000} {set sz [expr $sz+419]} {

    do_test multiplex-2.6.1.$sz.$jmode {
      multiplex_delete test.db
      sqlite3_multiplex_initialize "" 1
      sqlite3 db test.db
      multiplex_set db main $sz 32
    } {SQLITE_OK}

    do_test multiplex-2.6.2.$sz.$jmode {
      db eval {
        PRAGMA page_size = 1024;
        PRAGMA auto_vacuum = off;
      }
      db eval "PRAGMA journal_mode = $jmode;"
    } $jmode

    do_test multiplex-2.6.3.$sz.$jmode { 
      execsql { 
        CREATE TABLE t1(a PRIMARY KEY, b);
        INSERT INTO t1 VALUES(1, 'one');
        INSERT INTO t1 VALUES(2, randomblob($g_chunk_size));
      }
    } {}

    do_test multiplex-2.6.4.$sz.$jmode {
      db eval {SELECT b FROM t1 WHERE a=1}
    } {one}

    do_test multiplex-2.6.5.$sz.$jmode {
      db eval {SELECT length(b) FROM t1 WHERE a=2}
    } [list $g_chunk_size]

    do_test multiplex-2.6.6.$sz.$jmode { file size [multiplex_name test.db 0] } [list $g_chunk_size]

    do_test multiplex-2.6.99.$sz.$jmode {
      db close
      sqlite3_multiplex_shutdown
    } {SQLITE_OK}

  }
}

do_test multiplex-2.7.1  { multiplex_delete test.db }                                       {}
do_test multiplex-2.7.2  { sqlite3_multiplex_initialize "" 1 }                              {SQLITE_OK}
do_test multiplex-2.7.3  { sqlite3 db test.db }                                             {}
do_test multiplex-2.7.4  { lindex [ catchsql { SELECT multiplex_control(2, 65536); } ] 0 }  {0}
do_test multiplex-2.7.5  { lindex [ catchsql { SELECT multiplex_control(1, 0); } ] 0 }      {0}
do_test multiplex-2.7.6 { 
  execsql { 
    CREATE TABLE t1(a PRIMARY KEY, b);
    INSERT INTO t1 VALUES(1, randomblob(1000));
  }
} {}
# verify only one file, and file size is less than chunks size
do_test multiplex-2.7.7  { expr ([file size [multiplex_name test.db 0]] < 65536) } {1}
do_test multiplex-2.7.8  { file exists [multiplex_name test.db 1] }                {0}
do_test multiplex-2.7.9 { 
  execsql { 
    INSERT INTO t1 VALUES(2, randomblob(65536));
  }
} {}
# verify only one file, and file size exceeds chunks size
do_test multiplex-2.7.10 { expr ([file size [multiplex_name test.db 0]] > 65536) } {1}
do_test multiplex-2.7.11 { file exists [multiplex_name test.db 1] }                {0}
do_test multiplex-2.7.12 { db close }                                              {}
do_test multiplex-2.7.13 { sqlite3_multiplex_shutdown }                            {SQLITE_OK}

#-------------------------------------------------------------------------
# Try some tests with more than one connection to a database file. Still
# in rollback mode.
#
#   multiplex-3.1.*: Two connections to a single database file.
#
#   multiplex-3.2.*: Two connections to each of several database files (that
#                are in the same multiplex group).
#
do_test multiplex-3.1.1 {
  multiplex_delete test.db
  sqlite3_multiplex_initialize "" 1
  sqlite3 db test.db
  multiplex_set db main 32768 16
} {SQLITE_OK}
do_test multiplex-3.1.2 {
  execsql {
    PRAGMA page_size = 1024;
    PRAGMA journal_mode = delete;
    PRAGMA auto_vacuum = off;
    CREATE TABLE t1(a PRIMARY KEY, b);
    INSERT INTO t1 VALUES(1, 'one');
  }
  file size [multiplex_name test.db 0]
} {3072}
do_test multiplex-3.1.3 {
  sqlite3 db2 test.db
  execsql { CREATE TABLE t2(a, b) } db2
} {}
do_test multiplex-3.1.4 {
  execsql { CREATE TABLE t3(a, b) }
} {}
do_test multiplex-3.1.5 {
  catchsql { CREATE TABLE t3(a, b) }
} {1 {table t3 already exists}}
do_test multiplex-3.1.6 {
  db close
  db2 close
} {}

do_test multiplex-3.2.1a {

  multiplex_delete test.db
  multiplex_delete test2.db

  sqlite3 db1a test.db
  sqlite3 db2a test2.db

  foreach db {db1a db2a} {
    execsql {
      PRAGMA page_size = 1024;
      PRAGMA journal_mode = delete;
      PRAGMA auto_vacuum = off;
      CREATE TABLE t1(a, b);
    } $db
  }

  list [file size [multiplex_name test.db 0]] [file size [multiplex_name test2.db 0]]
} {2048 2048}

do_test multiplex-3.2.1b {
  sqlite3 db1b test.db
  sqlite3 db2b test2.db
} {}

do_test multiplex-3.2.2 { execsql { INSERT INTO t1 VALUES('x', 'y') } db1a } {}
do_test multiplex-3.2.3 { execsql { INSERT INTO t1 VALUES('v', 'w') } db1b } {}
do_test multiplex-3.2.4 { execsql { INSERT INTO t1 VALUES('t', 'u') } db2a } {}
do_test multiplex-3.2.5 { execsql { INSERT INTO t1 VALUES('r', 's') } db2b } {}

do_test multiplex-3.2.6 { 
  execsql { INSERT INTO t1 VALUES(randomblob(500), randomblob(500)) } db1a
} {}
do_test multiplex-3.2.7 { 
  execsql { INSERT INTO t1 VALUES(randomblob(500), randomblob(500)) } db1b
} {}
do_test multiplex-3.2.8 { 
  execsql { INSERT INTO t1 VALUES(randomblob(500), randomblob(500)) } db2a
} {}
do_test multiplex-3.2.9 { 
  execsql { INSERT INTO t1 VALUES(randomblob(500), randomblob(500)) } db2b
} {}

do_test multiplex-3.3.1 { 
  execsql { INSERT INTO t1 VALUES(randomblob(500), randomblob(500)) } db1a
  execsql { INSERT INTO t1 VALUES(randomblob(500), randomblob(500)) } db1b
  execsql { INSERT INTO t1 VALUES(randomblob(500), randomblob(500)) } db2a
  execsql { INSERT INTO t1 VALUES(randomblob(500), randomblob(500)) } db2b
} {}

do_test multiplex-3.2.X {
  foreach db {db1a db2a db2b db1b} { catch { $db close } }
} {}

#-------------------------------------------------------------------------
#

sqlite3_multiplex_initialize "" 1
multiplex_set db main 32768 16

# Return a list of all currently defined multiplexs.
proc multiplex_list {} {
  glob -nocomplain test2.db*
}

do_test multiplex-4.1.6 {
  multiplex_delete test2.db
  sqlite3 db test2.db
  db eval {CREATE TABLE t2(x); INSERT INTO t2 VALUES('tab-t2');}
  set res [multiplex_list]
  list [regexp {test2.db} $res]
} {1}
do_test multiplex-4.1.6a {
  sqlite3 db2 test2.db
  db2 eval {SELECT * FROM t2}
} {tab-t2}
do_test multiplex-4.1.7 {
  execsql {INSERT INTO t2 VALUES(zeroblob(200000))}
} {}
do_test multiplex-4.1.8 {
  sqlite3 db2 test2.db
  db2 eval {SELECT count(*) FROM t2}
} {2}
do_test multiplex-4.1.8a {
   db2 eval { DELETE FROM t2 WHERE x = 'tab-t2' }
} {}
do_test multiplex-4.1.8b {
  sqlite3 db2 test2.db
  db2 eval {SELECT count(*) FROM t2}
} {1}


do_test multiplex-4.1.9 {
  execsql {INSERT INTO t2 VALUES(zeroblob(200000))}
} {}
do_test multiplex-4.1.10 {
  set res [multiplex_list]
  list [regexp {test2.db} $res]
} {1}
do_test multiplex-4.1.11 {
  db2 close
  set res [multiplex_list]
  list [regexp {test2.db} $res]
} {1}
do_test multiplex-4.1.12 {
  db close
  multiplex_list
} {test2.db}


#-------------------------------------------------------------------------
# The following tests test that the multiplex VFS handles malloc and IO 
# errors.
#

sqlite3_multiplex_initialize "" 1
multiplex_set db main 32768 16

do_faultsim_test multiplex-5.1 -prep {
  catch {db close}
} -body {
  sqlite3 db test2.db
}
do_faultsim_test multiplex-5.2 -prep {
  catch {db close}
} -body {
  sqlite3 db test.db
}

catch { db close }
multiplex_delete test.db
multiplex_delete test2.db

do_test multiplex-5.3.prep {
  sqlite3 db test.db
  execsql {
    PRAGMA auto_vacuum = 1;
    PRAGMA page_size = 1024;
    CREATE TABLE t1(a, b);
    INSERT INTO t1 VALUES(10, zeroblob(1200));
  }
  faultsim_save_and_close
} {}
do_faultsim_test multiplex-5.3 -prep {
  faultsim_restore_and_reopen
} -body {
  execsql { DELETE FROM t1 }
}

do_test multiplex-5.4.1 {
  catch { db close }
  multiplex_delete test.db
  file mkdir test.db
  list [catch { sqlite3 db test.db } msg] $msg
} {1 {unable to open database file}}
catch { delete_file test.db }

do_faultsim_test multiplex-5.5 -prep {
  catch { sqlite3_multiplex_shutdown }
} -body {
  sqlite3_multiplex_initialize "" 1
  multiplex_set db main 32768 16
}

#-------------------------------------------------------------------------
# Test that you can vacuum a multiplex'ed DB.  

ifcapable vacuum {

sqlite3_multiplex_shutdown
do_test multiplex-6.0.0 {
  multiplex_delete test.db
  multiplex_delete test.x
  sqlite3_multiplex_initialize "" 1
  sqlite3 db test.x
  multiplex_set db main 4096 16
} {SQLITE_OK}

do_test multiplex-6.1.0 {
  execsql {
    PRAGMA page_size=1024;
    PRAGMA journal_mode=DELETE;
    PRAGMA auto_vacuum=OFF;
  }
  execsql {
    CREATE TABLE t1(a, b);
    INSERT INTO t1 VALUES(1, randomblob($g_chunk_size));
    INSERT INTO t1 VALUES(2, randomblob($g_chunk_size));
  }
} {}
do_test multiplex-6.2.1 { file size [multiplex_name test.x 0] } [list $g_chunk_size]
do_test multiplex-6.2.2 { file size [multiplex_name test.x 1] } [list $g_chunk_size]

do_test multiplex-6.3.0 {
  execsql { VACUUM }
} {}

do_test multiplex-6.99 {
  db close
  multiplex_delete test.x
  sqlite3_multiplex_shutdown
} {SQLITE_OK}

}


catch { db close }
catch { sqlite3_multiplex_shutdown }
sqlite3_shutdown
test_sqlite3_log 
sqlite3_initialize
finish_test